机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 折叠式车顶灯设计

折叠式车顶灯设计

本文ID:LW18381 字数:10224.页数:24

下载地址 全文下载链接(充值:128元) 如何充值?

车辆工程专业毕业论文,论文编号:JX881  论文字数:10224.页数:24

摘   要
 出租车在现在城市生活中扮演着重要作用,它给人们出行带来了很大的便利,同样它也代表着一座城市的形象。车顶灯是出租车的标志之一,如何清晰的把营运状态集成显示在车顶灯上将是未来车顶灯发展的一个方向。折叠式车顶灯提出来全新的折叠式结构。通过市场调查,了解乘客司机对原有车顶灯和折叠式车顶灯的意见,并做针对性设计和改进。本设计采用折叠式外壳,通过内部电动驱动四连杆机构,使其呈现打开和关闭的状态,代表空车和载客或者不在营运状态。本设计对车顶灯的电路做来重点设计,安装方便,无须重新布置车内饰电路,就可以将普通车顶灯更换为折叠式车顶灯,而且控制和普通车顶灯一样;同时,选用高亮度发光二极管作为光源,提高可靠性,增强亮度,延长使用寿命。该车顶灯将有效提高乘客对出租车营运状态的判断距离。本设计已经申请了国家实用新型专利,申请号为200920120918.4。

关键词:折叠  车顶灯  电路  灯光

Abstract
 Nowadays, taxis play an important part in city life, which not only make it convenience for people to travel, but also act as the symbol of a city. Top light is one of taxi’s symbols. And its future development should be that how to show the work state of taxi clearly. The author will have a new design for folding-style top light. Therefore, firstly, the author tries to know drivers’ and passengers’ opinion to original design of top light by market research. Then, the author will make the relevant design and improvement according to the research. This design adopts folding –style shell. And with its inner four-bar structure drive by electric, the top light represents that the car is empty or has passengers, or not in the working state by making the top light open or close. The author pays much attention to the design of top light circuit, making sure that it is convenient to install, and there is no necessary to re-arrange the circuit before changing common top light into folding-style top light. What’s more, the control of folding-style top light is the same to common one. As to material, it would be light-emitting with high-brightness, which can improve reliability, enhance brightness, and extend operation life span. The top light has effectively shortened the distance that passengers need to judge working state of taxi. Besides, this design has already applied for national utility model patent, and the application number is 200920120918.4.
 
Keywords: Fold  Top Light  Circuit  Light

目  录
中文摘要.i
英文摘要ii
目录iii
第一章     绪论1
 1.1  国内出租车使用的车顶灯.1
 1.2  国外出租车使用的车顶灯.1
 1.3  专利及其他新型车顶灯1
 1.4  研究方法及论文概述..3
第二章     折叠式车顶灯的市场调查4
 2.1  乘客调查5
 2.2  司机调查5
     2.3  调查总结6
第三章    总体方案设计..7
 3.1  外形结构设计..7
 3.2  驱动机构设计..8
  3.3  安装设计..10
 3.4  本章小结..11
第四章    电机选择及灯光电路设计.12
 4.1  电机选择..12
 4.2  灯光选用..16
  4.3  电路设计..17
 4.4  本章小结..18
第五章    结论19
致谢  20参考文献  21

本站会员可自行下载:下载地址 折叠式车顶灯设计 (收费:11800 积分)  如何获取积分?
折叠式车顶灯设计相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:基于CCD图像的齿轮点蚀面积计算 下一篇:16002000吨液压机控制系统(冷机..
推荐论文 本专业最新论文

点击查看关于 折叠式 车顶 设计 的相关论文题目 2011-04-10 20:26:38【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有