机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 无缝钢管切断模设计

无缝钢管切断模设计

本文ID:LW18495 字数:18705.页数:37

下载地址 全文下载链接(充值:128元) 如何充值?

机械设计制造及其自动化论文,论文编号:JX1017  论文字数:18705.页数:37

摘    要
 本论文简单介绍了无缝钢管切断模的设计方案。在对切管模具行业近年来国内外发展情况调查的基础上,简单分析了切断模的结构形式,钢管的机械性能与切断设备以及切断刀具。通过对钢管切断中切口的收缩问题及切断模的工作过程原理的分析,重点计算了无缝钢管切断模设计过程。采用无芯切割的双重冲切法进行无缝钢管切割,实现高质量、高效率的切割加工。最后,本文还简单介绍了该切断模的材料选择及热处理,寿命失效以及设计要点等内容,有利于对该切断模的设计理解。

关键词:  切断模  双重冲切法 无缝钢管  模具设计

Abstract
 Design of the seamless steel tubes blanking mould was introduced in this paper. On the basis of investigation for the blanking mould industry domestic and international developments in recent years, analysize the structure blanking form, the mechanical properties of steel pipe and the equipment of blanking and the tool of  steel pipes cut-off. For analysis in the contraction issue in blanking the pipe and the work process and the principle of blanking mould, to focus on design calculations of the seamless steel tubes blanking design process. Introduction of the dual-core cutting punching of the seamless steel tubes for blanking, to achieve high-quality, efficient blanking. Finally, an introduction on the choice of material and heat treatment, the life of failure and design features in blanking mould design, was useful for understanding the design of the blanking mould.

Keywords:  Blanking mould;   Double punching law;   Seamless steel tubes;
           Design of mould

目录
中文摘要 i
英文摘要 ii
目录 iii
第一章  绪论 1
 1.1 研究动机与目的 1
 1.2 研究的背景 1
 1.3 研究方法与系统描述 2
 1.4 论文主要内容 3
第二章 工艺分析及钢管切断工艺方案的选择 4
 2.1 引言 4
 2.2 钢管的机械性能与切断设备 4
 2.2.1 钢管分类情况 4
 2.2.2 钢管的机械性能 4
 2.2.3 钢管切断设备 6
 2.2.4 钢管切断的操作要点 6
 2.3 切断模的结构形式 7
 2.3.1 单刃口结构 7
 2.3.2 双刃口结构 8
 2.3.3 可调刃口结构 9
 2.4 本章小结 10
第三章 切断模刀具设计、材料选择及寿命失效 11
 3.1 引言 11
 3.2 钢管切断刀具研究与设计 11
 3.2.1 钢管切割与切割参数 11
 3.2.2 正转正前角切断分析 12
 3.2.3 反转切断分析 14
 3.2.4 正转负前角切削效果分析 14
 3.3 切断模的材料选择 16
 3.3.1 模具的工作条件对冷冲模具材料的要求 16
 3.2.2 冷冲模的材料类型 16
 3.3.3 冷冲模具材料的选用方法 17
 3.4 切断模的热处理与模具寿命失效 17
 3.4.1 切断模的热处理 17
 3.4.2 切断模的寿命失效 17
 3.5 本章小结 18
第四章 钢管切断模设计 19
 4.1 引言 19
 4.2 钢管切断中切口的收缩 19
 4.2.1 缩口原因分析 19
 4.2.2 影响缩口因素及解决办法 19
 4.3 冲模主要组成部分 22
 4.4 钢管切断模设计 23
 4.4.1 切断模的工作过程及工作原理 23
 4.4.2 无缝钢管切断模设计 24
 4.4.3 切断模的设计要点 29
 4.5 本章小结 30
第五章  总结 31
参考文献 32
致  谢 33

本站会员可自行下载:下载地址 无缝钢管切断模设计 (收费:11800 积分)  如何获取积分?
无缝钢管切断模设计相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:网架焊接空心球节点的应力分析 下一篇:循环立体模型车库设计
推荐论文 本专业最新论文

点击查看关于 无缝钢管 切断 设计 的相关论文题目 2011-04-11 09:30:10【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有