机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 汽车发动机机油冷却器产品及工艺设计

汽车发动机机油冷却器产品及工艺设计

本文ID:LW18531 字数:19411.页数:34

下载地址 全文下载链接(充值:128元) 如何充值?

机械设计制造及其自动化论文,论文编号:JX1053  论文字数:19411.页数:34

摘     要
 机油冷却器是柴油机的重要组成部件,它的性能的好坏直接影晌着柴油机的工作性能。因此,对机油冷却器的设计是柴油机设计过程中十分重要的一个环节。而近几年来,随着柴油机增压技术的不断发展,与之相配套的柴油机中冷技术也取得了长足的进展。产生了诸如冷轧翅片管式冷却器等的新式冷却器。与此同时,柴油机机油冷却器也得到了相应的发展。
 本文着重对冷轧翅片管式柴油机机油冷却器的原理进行概括,针对机油冷却器的作用、安装位置以及类型进行机油冷却器的设计,完成对机油冷却器散热原理的分析和润滑系统热循环模型的建立,确定发动机机油冷却器散热量,设计板翅式机油冷却器的主要零部件,研究板翅式冷却器的组成,翅片的分类及作用,板翅式冷却器的特点,其中设计不锈钢板翅式机油冷却器的结构,确定芯片的结构和翅片的设计,芯片类型、壳体等零件的设计,包括对机油冷却器管束的几何特性的分析,计算管束的几何特性以及机油冷却器的热力和液力计算,最后对设计的机油冷却器进行校核计算。设计机油冷却器的结构,对机油冷却器的生产工艺做简单的设计,掌握板翅式机油冷却器的生产工艺流程和真空钎焊的相关情况。
 
关键词:机油冷却器  设计  计算 工艺
  
 Abstract
 Oil cooler is an important component parts of diesel engine, it's good or bad performance of the diesel engine directly affect the work of the diesel engine performance. Therefore, the design of the oil cooler is a very important aspect of diesel engine design process. And in recent years, with the supercharged diesel engine technology, matched with the diesel engine in cold technology has made considerable progress. Produce such as cold-rolled finned tube cooler such as the new cooler. At the same time, diesel engine oil cooler has also been a corresponding development.    This article focuses on cold-rolled finned tube oil cooler of diesel engine to a general principle, in view of the role of engine oil cooler, the installation location and type of oil cooler design, completion of the oil cooler and heat analysis of the principle of thermal lubrication system cycle model to determine the engine oil cooler heat dissipation, the design of plate-fin oil cooler parts of the main study of plate-fin cooler component, the classification and the role of fin, plate-fin cooler features, One design of stainless steel plate-fin oil cooler structure, to determine the structure and fin-chip design, chip type, the design of shell and other parts, including engine oil cooler on the geometric characteristics of control analysis, calculation and control of geometric characteristics oil cooler and the thermal hydraulic calculation, the final design of the oil cooler to check the calculation. The design of the structure of oil coolers, oil coolers for the production process to do a simple design, master plate-fin oil cooler of the production process and vacuum brazing of the relevant circumstances.
 
 Keywords: Oilcooler  Design  Calculated  Technology
 

目 录
 摘     要 i
 Abstract ii
 第一章 绪论 1
1.1 课题研究的背景 1
1.2 课题研究的意义 2
1.3 国内外机油冷却器的研究现状 2
1.4 本章小结 7
 第二章 机油冷却器的原理与理论设计 8
2.1  机油冷却器的作用、安装位置及类型 8
2.2  机油冷却器散热原理分析 8
2.3  润滑系统热循环模型的建立 9
2.4 发动机机油冷却器散热量的确定 10
2.5  机油冷却器的总体结构 11
2.6  主要零部件的设计及特点 12
2 .6 .1 冷却芯子 12
2 .6 .2 蝶形弹簧 12
2. 6. 3  紧固螺栓 12
2.7 本章小结 13
 第三章  板翅式机油冷却器设计 14
3.1 引言 14
3.2 板翅式机油冷却器介绍 14
3.2.1 板翅式冷却器的组成 15
3.2.2  翅片的种类及作用 15
3.2.3 板翅式冷却器的特点 16
3.3  不锈钢板翅式机油冷却器结构设计 16
3.3.1  确定芯片结构 17
3.3.2  翅片设计 17
3.3.3  芯片垫块、加强圈等零件的设计 18
3.4机油冷却器的计算 19
3.4.1 机油冷却器管束的几何特性 19
3.4.2 管束几何特性的计算 20
3.4.3 机油冷却器的校核计算 21
3.5 本章小结 21
 第四章 板翅式机油冷却器生产工艺设计 22
4.1  板翅式机油冷却器生产工艺流程 22
4.1.1落料 22
4.1.2 拉伸 22
4.1.3 清洗 22
4.1.4 合片 23
4.1.5 压边 23
4.1.6 叠片 23
4.1.7 装夹 24
4.1.8 真空钎焊 24
4.1.9 气密性检验 24
4.1.10 平整法兰 24
4.1.11  终检 24
4.1.12  激光打印并封装 25
4.2  真空钎焊的相关情况 25
4.2.1  钎焊基本原理 25
4.2.2  钎焊夹具设计 25
4.2.3  钎焊缺陷及产生原因 26
4.3  工艺验证 27
4.4 本章小结 27
 第五章 总结 28
 参考文献 29
 致 谢 30

本站会员可自行下载:下载地址 汽车发动机机油冷却器产品及工艺设计 (收费:11800 积分)  如何获取积分?
汽车发动机机油冷却器产品及工艺设计相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:汽车货箱支架冲压工艺及模具设计 下一篇:电瓷帽坯机传动及控制系统设计
推荐论文 本专业最新论文

点击查看关于 汽车 发动机 机油 冷却器 产品 工艺 设计 的相关论文题目 2011-04-11 10:41:27【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有