机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 激振器关键液压部件选型及液压缸设计

激振器关键液压部件选型及液压缸设计

本文ID:LW18568 字数:19620.页数:40

下载地址 全文下载链接(充值:128元) 如何充值?

机械设计制造及其自动化论文,论文编号:JX1090  论文字数:19620.页数:40

摘 要
 液压减振器是车辆、机车等性能好差的关键性因素之一。液压减振器试验台(以下简称激振器)就是用来检验减振器性能好坏的试验装置,它在实验室内仿真模拟实际道路工况,可以在较短时间周期内,以极低的成本重复再现减振器的实际工况,从而达到检验减振器的目的。
 本文简要的介绍了目前国内外激振器的研发和使用状况,并着重介绍了目前使用最广的液压激振器。通过对液压激振器液压系统部分的分析,并结合《液压传动》等有关知识。根据本课题所给的参数要求,在查阅了大量相应参考文献的基础上,确定了包括电液伺服阀、液压泵等关键部件的选型;油箱、冷却器等关键辅助元件的型号;以及油箱散热及容积的计算。最后通过计算并结合文献,重点进行了液压缸的设计和计算,并绘制了相应的装配图与零件图。本次设计主要是进行激振器关键液压部件的选型及液压缸的设计,以此达到加深对液压激振器了解的目的。
 关键词:液压减振器  液压缸  电液伺服阀  液压泵 

Abstract
 Hydraulic shock absorber is one of the critical factors for vibration press motorcycles and other Vehicles. Hydraulic shock absorber test bed (the vibration) is used to test the quality of performance damper device, which in the laboratory simulation of actual road conditions, In a shorter time period, a very low cost of reproduction to repeat the shock absorber of the actual state of shock absorber to achieve the purpose of testing.
 This paper briefly introduced the current domestic and foreign research and development and use of the Vibrator situation and focus on the current most widely used hydraulic vibration. Through the hydraulic vibration analysis of the hydraulic system, combined with "hydraulic" and other relevant knowledge. According to this subject by the parameters, in the corresponding access to a large number of references on the basis of identified, including electro-hydraulic servo valves, hydraulic pumps and other key parts of the Selection; Fuel tanks, coolers, and other key components supporting models, and the cooling tank and volume calculations. Finally, calculate and combine literature, focusing on a hydraulic cylinder in the design and calculation, and the mapping of the corresponding parts and assembly plans. The design is a key Vibrator Selection of hydraulic components and hydraulic cylinder design, to achieve better understanding of the purpose of hydraulic vibration.
Keywords: Hydraulic   Shock Absorber   Cylinder Servo Valve  Hydraulic Pump

目 录
摘 要 i
Abstract ii
目 录 iii
第一章 前言 1
1.1 液压实验台研究现状及发展 1
1.2 液压实验台研究展望 2
第二章  课题研究的主要目标及技术路线 4
2.1 本课题研究的主要目标 4
2.2 液压激振试验台技术研究 4
第三章  液压激振器液压系统整体设计 6
3.1 整体功能分析 6
3.2 方案分析与拟订 7
3.2.1 方案分析 7
3.2.2 方案拟订 7
第四章  液压激振试验台液压系统关键部件选型 9
4.1 液压泵的选用 9
4.1.1 液压泵选用应注意的原则 9
4.1.2 柱塞泵功能分析 10
4.1.3 轴向柱塞泵的工作原理 10
4.1.4 轴向柱塞泵的排量和流量计算 12
4.1.5 液压泵的型号确定 12
4.2 电液伺服阀的选型 12
4.2.1  电液伺服阀的工作原理 13
4.2.2  伺服阀型号的确定 13
第五章  液压激振试验台液压系统关键辅件选型 14
5.1 油箱的选型 14
5.1.1闭式油箱容积的确定 14
5.1.2根据经验初步确定容积 14
5.1.3 从散热的角度确定油箱容积 14
5.2 冷却器的选型 16
5.3 蓄能器的选型 17
第六章 液压缸的设计和计算 19
6.1液压缸的类型及选择 19
6.1.1 液压缸的类型 19
6.1.2 液压缸类型的选择 20
6.2 液压缸的设计计算 23
6.2.1 液压缸工作压力的确定 23
6.2.2 液压缸主要尺寸的确定 23
6.3 液压缸的结构设计 24
6.3.1液压缸的总体结构 24
6.3.2 缸筒与导向座的连接 25
6.3.3液压缸的密封 27
第七章 总结 30
致 谢 31
参考文献 32
附件1 33
附件2 34

本站会员可自行下载:下载地址 激振器关键液压部件选型及液压缸设计 (收费:11800 积分)  如何获取积分?
激振器关键液压部件选型及液压缸设计相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:助力器带主缸高低温耐久试验台 下一篇:非线性转子系统不平衡量识别方法..
推荐论文 本专业最新论文

点击查看关于 关键 液压 部件 选型 设计 的相关论文题目 2011-04-11 12:11:16【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有