机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 微量注射泵软件设计

微量注射泵软件设计

本文ID:LW18673 字数:25768.页数:88

下载地址 全文下载链接(充值:128元) 如何充值?

机械设计制造及其自动化论文,论文编号:JX1195  论文字数:25768.页数:88

摘要
 在了解了微量注射泵的工作原理,性能指标和优缺点后,本文着重进行了微量注射泵的软件设计。微量注射泵控制系统采用单片机(STC89C58)作为主控芯片,降低生产成本;利用C51进行软件编程,提高编程效率;利用液晶屏LCD作为人机界面,显示中文菜单和命令,为用户提供了方便。
 本文共分为绪论、正文(四章)和结论等六部分。
 绪论主要介绍了本课题的背景和国内外发展现状等情况;
 第二章介绍了微量注射泵控制系统的分析和总体方案的设计,包括微量泵要实现的功能以及应达到的性能指标等要求,根据具体的要求分析、选择合理的控制方案;
 第三章简单介绍在本软件设计中涉及的硬件设备,包括按键扫描处理、LCD显示屏驱动、步进电机驱动等硬件介绍说明,主要用于软件功能的分析;
 第四章是本文的重点,在这一章节中详细地叙述了微量注射泵的软件设计过程,以及各软件模块的功能和实现方法;
 第五章介绍系统各软件模块的调试方法,以及系统整体调试的情况;
 最后是本次毕业设计的结论、参考文献和程序附录。
关键词: 微量注射泵  控制系统  软件设计

Abstract
 After understanding the theory, the standards, the advanced and the disadvanced of the micro-injection pump, this article will put emphasis upon designing for its software.The system of the micro-injection pump adopt STC89C58 as a controller chip,to reduce cost; and use the C language to program for improving efficiency;and to provide a convenient way for users, we use a lcd screen as a man-machine device,that can display menus and commands in Chinese.
 This article was divided by six parts ,and will show you as list as following:
 The first chapter will introduce the background and development of the micro-injection pump in the world.
 The second chapter will analysis fuctions, standards and requirements of the micro-injection pump. And according to that, we will give out a design of its controller’s system.
 The next chapter will tell you some hardwares and devices, that was refered in software designing.It will say something about key scanning,lcd screen driving and step-motor driving,and so on, in order to analysis fuctions of software.
 The fourth chapter is the most important part in this article. This part will introduce the process of software designing, and some fuctional modules and how it carry out.
 The fifth chapter will debug the software that already completed.
 The last part is conclusion about this graduating design,including some reference literatures and program list.
Key word :  Micro-injection pump  control system  software designing
   
目录
摘要 i
Abstract ii
目录 iii
第一章 绪论 1
1.1引言 1
1.2 国内外的现状及发展趋势 1
1.3 本课题主要研究内容 2
第二章  微量注射泵系统分析及总体方案设计 3
2.1 功能及要求分析 3
2.2 控制方案设计 3
2.3本章小结 4
第三章 微量注射泵控制系统硬件构成 5
3.1 控制系统硬件构成 5
3.2 主控板 5
3.3  LCD液晶屏 7
3.4 步进电机 7
3.5 本章小结 8
第四章 微量注射泵控制系统软件设计 9
4.1 系统总控制程序流程 9
4.2各功能模块软件设计 10
4.3 头文件模块 10
4.3.1 config头文件 10
4.3.2 keydisplay头文件 11
4.3.3 lcddriver头文件 13
4.3.4 LCD显示菜单头文件 14
4.4主函数模块 15
4.5 系统初始化模块 16
4.6 T0中断程序模块 17
4.6.1 键值读取模块 18
4.6.2 LCD显示输出模块 19
4.7 LCD驱动模块 20
4.7.1 发送命令 22
4.7.2 发送数据 23
4.7.3 LCD初始化 23
4.7.4 字符串显示 23
4.8显示模块 24
4.8.1 字符串显示 24
4.8.2 数字显示 25
4.8.3 数字调整模块 26
4.8.4 清除显示屏 27
4.9 键值处理模块 27
4.9.1 键值设定 27
4.9.2 功能键处理 29
4.10 步进电机驱动模块 34
4.10.1 脉冲控制程序 35
4.10.2 步进电机状态参数控制程序 36
4.11 本章小结 37
第五章 系统软件调试 38
5.1 按键调试 38
5.2 LCD显示调试 38
5.3 步进电机调试 38
5.4 整机调试 39
5.5 本章小结 39
第六章  总    结 40
附录 程序清单 41
参考文献 66
致谢 67
外文翻译

本站会员可自行下载:下载地址 微量注射泵软件设计 (收费:11800 积分)  如何获取积分?
微量注射泵软件设计相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:定圈反挤压计算与工艺设计 下一篇:工业用声警报控制系统
推荐论文 本专业最新论文

点击查看关于 注射 软件 设计 的相关论文题目 2011-04-11 15:46:23【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有