机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 等共轭曲率直齿锥齿轮的研究和制造

等共轭曲率直齿锥齿轮的研究和制造

本文ID:LW18738 字数:15589.页数:53

下载地址 全文下载链接(充值:128元) 如何充值?

机械设计制造及其自动化论文,论文编号:JX1261  论文字数:15589.页数:53

摘     要
 本论文从普通直齿圆锥齿轮的等共轭曲率齿形和双圆弧弧齿锥齿轮的研究得到启发,提出了等共轭曲率高阶接触直齿锥齿轮。该齿轮是f形的,不论是齿面接触强度还是轮齿弯曲强度都比溅开线齿轮和双圆弧齿轮有大幅度的提高,而且承载能力更强,有很高的实用价值。
 齿轮传动与生产即使在现代电气、数控技术高度发达的今天,仍占有重要的位置。然而圆弧齿轮在我国的应用和发展,主要是指圆柱齿轮传动,而圆弧齿形应用于圆锥齿轮传动,至今收效甚微。所以f形直齿锥齿轮远比圆弧齿轮优越,因此直齿锥齿轮的应用逐渐被重视,其使用价值也越来越,对直齿锥齿轮的研究也越来越深入。

关键词:高阶接触  直齿  锥齿轮  啮合  f形齿形

Abstract
 This paper gets the inspiration from the tooth form of the ordinary straight bevel gear the  equiconjugate of curvature and the double-circular-arc of the spiral bevel gear, then proposes high degree contact with the equiconjugate of curvature straight Bevel Gear. The tooth form of this gear is f-shaped, whether the contact strength of the tooth flank or the bending strength of the gear tooth all higher than the involute gear and the double-circular-arc gear, and it can carrying more capacity, have a high practical value.
 Even in the modern time ,the electrical, NC technology highly developed, the gear still occupies an important position. However in our country the  circarc gear in used and development, mainly refers to the cylindrical gearing, and the arc tooth for spiral bevel gear Drive, has few results. So the f-saped Bevel Gear Gear superior than the spiral, straight Bevel Gear and it is  attention to the application being gradually, its practical value are higher and higher, the study on the Straight Bevel Gear are more and more intensive.
Key words:  high degree contact   straight tooth  bevel gears  mesh  f-shaped

目  录
 
中文摘要 Ⅰ
英文摘要 Ⅱ
目录 Ⅲ
第一章    绪论 1
第二章    重载圆锥齿轮的自然齿形 3
 2.1 导言 3
 2.2 相对运动速度方向的诱导曲率 3 
 2.3 诱导曲率为0的条件 4
第三章    等共扼曲率平面齿轮(冠轮)齿廓的构造   7
第四章    用相似法在范成仪上画出背锥齿形 9
第五章    直齿圆锥齿轮理论齿面 12
 5.1 瞬轴面和啮合参数 12
 5.2 直齿圆锥齿轮的切齿方案 15
 5.3 产形面和啮合方程式 17
 5.4 啮合面 19
 5.5 被切齿轮的齿面 21
第六章  直齿圆锥齿轮理论齿面转换成f形齿形 23
 6.1直齿圆锥齿轮理论齿面(便于改成f形齿形的形式) 23
 6.2 f形齿形直齿圆锥齿轮理论齿面 27
第七章 刀具的设计与加工 31 
第八章:圆锥齿轮的加工 37
    8.1  f形齿形直齿圆锥齿轮理论齿面 37
 8.2 在牛头刨床上加工 40
 8.3 新型圆锥齿轮的机械加工 45
 第九章:结论 48
 参考文献 49
 致谢 50

本站会员可自行下载:下载地址 等共轭曲率直齿锥齿轮的研究和制造 (收费:11800 积分)  如何获取积分?
等共轭曲率直齿锥齿轮的研究和制造相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:基于WinCC的油冷却器装配机控制系.. 下一篇:门的开闭机构等典型机构的模拟仿真
推荐论文 本专业最新论文

点击查看关于 率直 齿轮 研究 制造 的相关论文题目 2011-04-11 19:19:12【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有