机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 转子振动测试分析与减振研究

转子振动测试分析与减振研究

本文ID:LW18772 字数:26409.页数:72

下载地址 全文下载链接(充值:128元) 如何充值?

机械设计制造及其自动化论文,论文编号:JX1295  论文字数:26409.页数:72

摘    要
 
 随着转子向高速、高功率、高可靠性等方面发展,在工程实际中出现的很多故障都与系统振动有关,因此转子振动故障越来越引起人们的重视。许多机组的工作转速超过临界转速,但随之而来的一系列事故使人们发现转子在超临界运行到某一转速时,会出现强烈的自激振荡并造成失稳,这就是转子的油膜振荡失稳。作者在了解现在转子振动的基本故障的基础之上,确立本文的研究目标和内容,在一多盘转子系统上对油膜涡动到油膜振荡的过程进行实验研究,揭示了转子的油膜由涡动到振荡的发生发展过程,给出了转子发生油膜振荡时的多周期性的轴心轨迹、频谱特征。编制程序对转子振动信号进行采集并监控,对采集的数据用origin软件对振动信号进行分析比较;在此基础上使用减振装置,并再次对转子进行振动测试并比较分析。对研究转子的油膜失稳故障现象、实现旋转机械的状态监测和预报有重要意义。
 
关键词:转子-轴承系统  数据采集  振动测试  油膜振荡 
 
Abstract
 As the rotor-bearing system with the high speed, high power and high reliability is developed. The vibrations fault of a rotor-bearing system is of much interest, Many units of speed over the critical speed, But this was followed by a series of incidents has led to the discovery of the supercritical rotor to a certain speed operation, be strong and self-excited oscillation caused instability, and this is the film rotor oscillation instability. The author of the rotor vibration now understand the basic fault basis, the paper established the objectives and content in a multi-disk rotor system on the film whirl of the film oscillation experiments in the process of research, reveals the film from the rotor whirl of oscillation in the development process. given rotor oscillations occur when the film more cyclical orbit, the spectral characteristics. Procedures for rotor vibration signal acquisition and control, Collecting data on the origin of software used for vibration signal analysis and comparison; On this basis the use of damping devices and again on the rotor vibration tests and comparative analysis. Research on the film instability rotor failure and the fulfillment of rotating machinery condition monitoring and forecasting are important.
 
Key word: rotor - bearing system, counts gathering, vibration test, oil whip
目录
中文摘要 i
英文摘要 Ⅱ
目录 Ⅲ
第1章 绪论 1
 1.1 本文研究的目的和意义 1
 1.2研究现状分析 1
 1.2.1国外研究现状分析 2
 1.2.2国内研究现状分析 2
 1.3研究内容和目的 3
第2章 转子振动故障 4
2.1 转子振动故障 4
 2.1.1 转子不平衡 4
 2.1.2 转子振动故障 4
 2.1.3 油膜振荡 5
 2.1.4 滑动环密封故障 5
 2.1.5 碰磨故障 6
2.2减振技术 6
第3章 振动测试 8
3.1 振动测试试验 8
 3.1.1测试系统组成 8
 3.1.2测试系统的输入输出硬件 9
 3.1.3传感器选择 12
 3.1.4数据采集 13
 3.1.5信号采集程序 13
 3.1.6数据处理 18
 3.2 采集系统和程序的测试及信号分析的学习 18
 3.2.1系统固有频率的测量 19
 3.2.2 强迫振动频率的测量 20
 3.2.3 电机频率谱图 21
 3.2.4 整周期采样的实现 22
第4章 转子振动的测试分析及消除 25
 4.1 引言 25
 4.2  转子轴承系统 25
 4.2.1  转子轴承实验台 25
 4.2.2  转子振动监测程序和测试 26
 4.3  油膜涡动发展过程 27
 4.4  施加静载荷消除油膜振荡的测试 29
结束语 35
参考文献 36
致谢 37
附录 38
外文翻译

本站会员可自行下载:下载地址 转子振动测试分析与减振研究 (收费:11800 积分)  如何获取积分?
转子振动测试分析与减振研究相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:农用车140机械变速器设计 下一篇:带耳朵轴承的流场计算
推荐论文 本专业最新论文

点击查看关于 转子 振动 测试 分析 研究 的相关论文题目 2011-04-11 20:48:46【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有