机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 家用电风扇三维造型设计及快速成型制作

家用电风扇三维造型设计及快速成型制作

本文ID:LW18837 字数:12278.页数:53

下载地址 全文下载链接(充值:118元) 如何充值?

材料成型及控制工程论文,论文编号:JX1396  论文字数:12278.页数:53

摘     要

 本课题主要研究家用电扇的造型设

计以及快速成型,针对市场中家用电扇的外

形分析,得出风扇叶片及各组成部分的结构

和工艺特点及一些种要的数据,并从产品的

美观及实用角度出发,掌握并利用Pro/e进

行对风扇的三维造型,设计出理性并美观的

造型。快速成型机是一种应用计算机数控和

激光技术的机床,它是利用逐层叠加的原理

,成型角度可以看作为点、线、面的叠加。

本次课题要求了解快速成型机对图形的预处

理过程,利用快速成型机制作模型,保证加

工过程时纸的走向,并利用美工刀对模型进

行剥离。本课题就是在产品设计这一应用方

向所作的一种尝试,通过对现有的产品模型

进行分析研究,设计制作出模型,并与现有

实物进行分析比较其优缺点,在完成了制作

后对模型进行后处理。
 关键词:  产品设计  Pro/e造型 

快速成型  模型后处理
Dimensional design for household

electric fans and rapid prototyping


Abstract
 This issue research mainly

home electric fan shape design and

rapid prototyping, for the home fans

in the shape of the market analysis,

obtained part of fan blades and the

structure and process characteristics

and some kinds of data from the

product's aesthetic and practical

point of starting, control and use of

Pro / e for the fan of three-

dimensional modeling to design a

rational and beautiful look.

Application of rapid prototyping

machine is a computer numerical

control machine tools and laser

technology, it is the principle of

superposition using layer by layer,

forming the angle can be considered as

point, line, surface overlay. The task

required knowledge of rapid

prototyping machine graphics

pretreatment process modeling using

rapid prototyping machine to ensure

that when the paper to process and use

the model stripping knife. The issue

is the direction in product design by

the application of an attempt, through

the analysis of the existing product

model to research, design to produce

models, and were analyzed and compared

with the existing physical advantages

and disadvantages, after the

completion of the production model

post-processing.
 Key words:  Product design 

Pro/e design  Rapid prototyping  Model

of post-processing

目录
中文摘要 I
英文摘要 II
目录 III
第一章    绪论 1
1.1选题的背景与意义 1
1.2有关产品设计效果的设计思绪 2
第二章    产品的初步理念 3
2.1产品的初级设计绘图阶段 3
2.2产品的初级设计计算阶段 5
第三章    产品的造型过程 7
3.1风扇叶片 7
3.2风扇前罩 14
3.3 风扇后罩 18
3.4 风扇后盖 20
第四章    快速成型 27
4.1快速成型的目的 27
4.2快速成形技术的成型原理 27
4.3 HRP-II B快速成型机简介 28
4.4实验制作方法及成型件的制作 30
第五章    成型件的后处理 32
第六章    结论 36
参考文献 37
致谢 38
附录 39

本站会员可自行下载:下载地址 家用电风扇三维造型设计及快速成型制作 (收费:9800 积分)  如何获取积分?
家用电风扇三维造型设计及快速成型制作相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:微型间歇分度器设计——造型与运.. 下一篇:瓶盖注射模的设计及其虚拟拆装
推荐论文 本专业最新论文

点击查看关于 家用 电风扇 三维 造型设计 快速成型 制作 的相关论文题目 2011-04-12 17:21:51【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有