机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 圆柱齿轮减速器加工装配生产线仿真

圆柱齿轮减速器加工装配生产线仿真

本文ID:LW19011 字数:9989.页数:34

下载地址 全文下载链接(充值:158元) 如何充值?

机械设计制造及其自动化论文,论文编号:JX1492  论文字数:9989.页数:34  附任务书,开题报告,文献综述,外文翻译,CAD图

摘    要

 本论文主要介绍如何运用MSM机电一体化仿真软件对圆柱齿轮减速器加工和装配生产线的机器人控制仿真以及数控加工中心EXSLWIN的模拟加工运用。
 MSM仿真操作从分析机器人要实现的各个动作,再进行生产线的布置,再建立各个机器人和料仓间的信号联接,再到编写机器人控制程序,最后实现对圆柱齿轮减速器加工和装配过程的机器人控制仿真,完成整条生产线模拟加工;另外数控加工介绍了EXSLWIN软件,掌握EXSLWIN加工仿真,通过EXSLWIN中实现对毛胚体的铣、车等模拟,仿真加工出需要的零件,再把EXSLWIN中加工的零件,导入到MSN仿真操作系统来实现圆柱齿轮减速器加工和装配生产线的机器人控制仿真。
 通过对EXSLWIN和MSM两个软件的使用,验证生产线仿真在实际设计中的重要性.
关键词:机器人  生产线仿真  数控加工 

Abstract
 This paper describes how to use MSM mechatronics simulation software for cylindrical gear reducer assembly line processing and robot control simulation as well as CNC machining center EXSLWIN use analog processing.     MSM simulation analysis of robot operation from the various actions to achieve, and then to the production line layout, and then the establishment of the various robots and the signal connection between the hopper and then to the preparation of the robot control program, and finally realize the cylindrical machining and assembly gear reducer simulation of the robot control process to complete the simulation of the entire production line processing; Also introduced CNC machining EXSLWIN software, EXSLWIN master processing simulation, EXSLWIN achieved through the embryo of the mill hair, cars and so on simulation of the need for processing of parts, EXSLWIN further processing of the parts, into the operating system to achieve simulation MSN cylindrical gear reducer processing and assembly line robot simulation.     EXSLWIN and MSM through the use of two softwares to verify the production line simulation in the actual design of the importance of.
 
Keywords: robot   manufacturing line simulation   CNC Machining

目  录
中文摘要 I
英文摘要 II
目录 III
第一章     绪论 1
 1.1  研究目的 1
 1.2  研究背景 1
 1.3  研究方法与系统描述 2
 1.4  论文內容概述 4
 1.5  本章小结 4
第二章     MSM机器人控制仿真 5
 2.1   控制目的 5
 2.2   实现任务 5
 2.3   操作过程 6
     2.4   本章小结 14
第三章    数控机床EXSL操作仿真  15
 3.1   EXSL操作过程简介 15
     3.2  铣削加工操作 15
           3.2.1  加工实体 15
3.2.2  加工过程 16
 3.3   本章小结 19
第四章    减速器生产线仿真 20
第五章    结论 22
参考文献 23
附件1 24
附件2 28
致谢 31

本站会员可自行下载:下载地址 圆柱齿轮减速器加工装配生产线仿真 (收费:12800 积分)  如何获取积分?
圆柱齿轮减速器加工装配生产线仿真相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:轴承清洗连线装置主机设计 下一篇:油水介质分离系统中的加热装置设计
推荐论文 本专业最新论文

点击查看关于 圆柱 齿轮 减速器 加工 装配 生产线 仿真 的相关论文题目 2011-04-15 19:30:28【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有