机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 哈尔滨市呼兰镇污水处理厂的初步设计

哈尔滨市呼兰镇污水处理厂的初步设计

本文ID:LW24488 字数:16572,页数:53

下载地址 全文下载链接(充值:128元) 如何充值?

论文字数:16572,页数:53   附CAD图

10万吨污水处理厂初步设计
摘 要
 本设计是哈尔滨市呼兰镇污水处理厂的初步设计,主要任务是工艺流程选择及构筑物设计和计算。该处理厂处理城市污水,总规模为100000m3/d。根据设计要求、相关规范及实际情况,通过对各种污水处理工艺进行技术经济比较,本工程选用A2O法处理工艺。A2O工艺流程简单,基建投资和运行费用小,运行灵活,管理方便,且出水水质好,可进行硝化和反硝化反映,从而达到生物脱氮除磷的功能,保证出水达到污水排放标准,做到了水资源的合理利用。其主要构筑物包括中格栅、进水泵房、细格栅、平流沉砂池、A2O池、二沉池、接触消毒池、浓缩池、污泥脱水机间等。
关键词:A2O;污水处理;新工艺;活性污泥

Ten million tons of sewage treatment plant design

Abstract

 This design is the Harbin Hulan Town Sewage treatment plant preliminary design, the primary mission is the technical process choice and the construction design and the computation. This treatment plant processes the urban sewage, the overall scale is 100000m3/d. According to design requirements, related standard and actual situation, through carries on the technical economy comparison to each kind of sewage treatment craft, this project selects A2O law processing craft. A2O technical process is simple, the initial cost and the operating cost are small, the movement is flexible, manages conveniently, and the water leakage water quality is good, may carry on the nitration and the denitrification reflected, thus achieves the biological denitrogenation to eliminate the phosphorus the function, guaranteed that the water leakage achieves the sewage disposal standard, has achieved the water resources reasonable use. Its main construction including the grill, the feed pump room, the thin grill, the advection sand collector, A2O pond, two sinks between the pond, the contact disinfection tank, the sludge dehydrator and soon.
Keywords:A2O;Sewage treatment;New craft;Activated sludge


目  录
中文摘要 I
英文摘要 II
目录 III
1 绪论 1
1.1 选题的背景与意义 1
1.1.1 本次设计的背景 1
1.1.2 本次设计的意义 1
1.2 设计依据和设计内容 2
1.2.1 设计依据 2
1.2.2 设计内容 2
2 处理工艺的确定 3
2.1 污水处理工艺方案比较 3
2.1.1 传统活性污泥法 3
2.1.2 氧化沟法 4
2.2 工艺的确定 5
3 污水处理工艺设计计算 6
3.1 污水处理构筑物设计计算 6
3.1.1 泵前中格栅 6
3.1.2 污水提升泵站 8
3.1.3 泵后细格栅 12
3.1.4 平流沉砂池 14
3.1.5  A2/O工艺 15
3.1.6 二沉池 26
3.1.7 接触消毒池与加氯间 34
3.2 污泥处理构筑物设计计算 36
3.2.1 污泥处理方法的选择 36
3.2.2 污泥泵房设计 36
3.2.3 污泥浓缩池 37
3.2.4 贮泥池 39
3.2.5 污泥脱水 41
4 污水处理厂总体布置 43
4.1 总平面布置 43
4.1.1 总平面布置原则 43
4.1.2 总平面布置结果 44
4.2 高程布置 44
4.2.1 高程布置原则 45
4.2.2 水头损失计算 45
4.2.3 高程确定 46
致 谢 48
参考文献 49

本站会员可自行下载:下载地址 哈尔滨市呼兰镇污水处理厂的初步设计 (收费:11800 积分)  如何获取积分?
哈尔滨市呼兰镇污水处理厂的初步设计相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:供水管网二次污染控制工程实例总.. 下一篇:4万吨污水处理厂初步设计 图纸
推荐论文 本专业最新论文

点击查看关于 哈尔滨市 呼兰 污水 处理厂 初步 设计 的相关论文题目 2012-04-13 07:44:48【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有