机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 理工科论文下载 -> 路宝车工具箱盖双型腔注塑模设计

路宝车工具箱盖双型腔注塑模设计

本文ID:LW62756 字数:20762.页数:52

下载地址 全文下载链接(充值:128元) 如何充值?

论文字数:20762.页数:52 附CAD图, 外文翻译

摘  要
 
 模具在制造业中的地位越来越高,模具技术水平的高低,已成为衡量一个国家制造业水平高低的重要标志。本文主要介绍了注塑模设计的方法及过程。首先,介绍了注塑模在国内外的发展现状和未来的发展趋势,并对塑件的结构进行分析,然后根据塑件结构进行模具设计。设计内容包括:注射机型号的选择、成型零部件的设计、浇注系统、顶出机构设计、侧向抽芯机构、冷却系统和模架的设计,此外,还对注塑模其他零部件进行了简单的介绍和设计。其中侧向抽芯机构是设计中的难点,说明书中对其进行了详细的设计。
关键词:模具 注塑模设计 塑件 侧向抽芯

 Abstract

 The mold is more and more high in manufacturing industry status, the mold technical level has become the important symbol to weigh the level of a national manufacturing industry horizontal. This article mainly introduced the injection mold’s designing’s method and process. First, it introduced the injection mold’ present development situation in the domestic and foreign and the future development tendency, than analyzed this plastic model’s structure, then designed the mold according to the plastic model’s structure. The designing content includes: injection model machine ’choice, designing of components of take shape, designing of the pouring system, designing of goes against system, designing of the side draws out system, designing of the cooling system and the mold, in addition, there is the simple introduction and designing of other mold’s spare parts. The side draws out system is difficulty in the designing, I design it in detail in the instruction booklet .
Key  words : Mold   Injection mold’s designing  Plastics model
            The side draws out
 
 目  录

摘要 I
Abstract II

第1章  绪论 1
1.1  选题的依据和意义 1
1.2  本课题在国内外的研究现状 1
1.3  本课题的发展展望 3
第2章  方案分析 4
2.1  设计任务 4
2.2  塑件分析 4
2.2.1 塑件外形分析 4
2.2.2 塑件精度及设计基准 5
2.2.3 塑件所用塑料名称,性能参数及成型条件 5
2.3  设备的选择 5
2.4  拟定模具结构方案 7
第3章  模具总体设计 10
3.1  成型部分及零部件设计 10
3.1.1 分型面的确定 10
3.1.2 型腔数的确定 11
3.1.3 一般凹凸模结构设计 12
3.1.4 其他参与成型的部分及成型零件镶拼组合原则 12
3.1.5 型腔壁厚计算 13
3.1.6 成型工作尺寸计算及脱模斜度的确定 15
3.2  浇注系统设计 19
3.2.1 浇注系统的总体构成 19
3.2.2 主流道设计 20
3.2.3 分流道设计 21
3.2.4 浇口设计 22
3.2.5 冷料穴设计 23
3.3  排溢系统设计 24
3.3.1 排气槽开设原则 25
3.3.2 排气槽尺寸设计 25
3.4  脱模机构设计 25
3.4.1 脱模机构的构成与功能 25
3.4.2 取出机构的设计 26
3.4.3 脱出机构设计原则 26
3.4.4 塑件的脱出机构设计 30
3.4.5 浇注系统凝料的脱出部件设计 33
3.5  侧向抽芯机构 34
第4章  冷却系统 35
4.1  冷却装置的基本结构形式 35
4.2  冷却装置设计分析 35
4.2.1 冷却装置设计的基本考虑 35
4.2.2 冷却装置的理论计算 36
4.2.3 冷却回路的布置 38
4.3  冷却系统的零件 39
第5章  模体(模架)设计 41
5.1  模板尺寸 41
5.2  固定板与垫板的尺寸 42
5.3  垫块(支承块) 42
5.4  导向零件 43
5.4.1 导向结构的总体设计 43
5.4.2 导柱的设计 44
5.4.3 导套的设计 44
5.5  连接零件 44
结论 46
参考文献 47
致谢 48

本站会员可自行下载:下载地址 路宝车工具箱盖双型腔注塑模设计 (收费:11800 积分)  如何获取积分?
路宝车工具箱盖双型腔注塑模设计相关论文
论文人工降重
本论文在理工科论文下载栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:路宝车后视镜盖单型腔注塑模设计 下一篇:路宝车工具箱盖加强件
推荐论文 本专业最新论文

点击查看关于 路宝车 工具箱 双型腔 注塑模 设计 的相关论文题目 2013-02-23 17:18:06【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有