机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具外文翻译 -> 带式输送机的调试及对其液压自动拉紧装置的研究

带式输送机的调试及对其液压自动拉紧装置的研究

本文ID:LW5574

下载地址 全文下载链接(充值:19元) 如何充值?

 

中文字数2601,页数3   英文字数1580页数4

带式输送机的调试及对其液压自动拉紧装置的研究
 带式输送机液压自动拉紧装置是根据胶带在起动和正常运转时对拉紧力的不同需要,经合理的胶带张力模型分析研究而设计的。液压自动拉紧装置是传统拉紧方式的更新换代产品,可广泛应用于煤矿、冶金、电厂、水泥厂、码头等各种散物料带式输送设备的张紧。带式输送机经过两个世纪的发展。已成从最初的雏形发展成为高带速、长运距、大功率、大运量的现代化运输工具,带式输送机广泛应用于冶金、矿山、化工、港口、电站、轻工、建材和粮食等许多上企业领域。带式输送机因其工作平稳可靠、噪声小,结构简单,运行费用低,可在任意位置加料或卸料。已成为主要的散体物料运输设备之一。由于输送带的粘弹性的特性,在带式输送机运行时为了保证必要的摩擦力,必须提供合适的拉紧力。张紧装置是带式输送机不可缺少的重要组成部分,它的性能好坏直接影响带式输送机整体的性能。
 皮带输送机是由机头、机尾、驱动装置、拖辊、滚筒、中问架、皮带、清扫器等组成的。在皮带输送机安装结束,正式投入使用前,需对设备进行调试。
1.皮带输送机的调试过程
 1.1皮带输送机皮带跑偏

Commissioning of the belt conveyor and automatically tighten its hydraulic device of
    Hydraulic belt conveyor automatically tensioning device is based on tape and in normal operation at the start of the strain of the different needs of the tape, after reasonable analysis of tension model designed. Hydraulic automatically tensioning device is the traditional way tighten the upgrading products can be widely used in coal, metallurgical, power plants, cement plants, terminals and other bulk material conveyor belt of the take-up equipment. Belt conveyor after two centuries of development. Has become from the initial prototype development with a high-speed, long distance, high-power, the capacity of modern means of transport, belt conveyor widely used in metallurgy, mining, chemical industry, ports, power plants, light industry, building materials and food And many other enterprises on the field. Because of their steady and reliable work belt conveyor, the noise of small, simple structure and operation of low-cost, anywhere in feeding or unloading. Has become a major granular material transport equipment one. As the conveyor belt of the viscoelastic properties, in order to ensure belt conveyor running the necessary friction, we must provide a suitable strain of. Tension belt conveyor device is an important and indispensable component of its properties have a direct impact on the overall performance of belt conveyors
 Conveyor belt by the nose, tail, drive, drag roller, roller, asked planes, belts, consisting of cleaning, etc.. Conveyor belt installed in the end, officially put into use, the equipment needed to debug.
A conveyor belt of the debugging process

本站会员可自行下载:下载地址 带式输送机的调试及对其液压自动拉紧装置的研究 (收费:1900 积分)  如何获取积分?
带式输送机的调试及对其液压自动拉紧装置的研究相关论文
论文人工降重
本论文在机械模具外文翻译栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:数控机床维修改造技术 下一篇:钢绞线带式输送机的发展
推荐论文 本专业最新论文

点击查看关于 输送机 调试 液压 自动 装置 研究 的相关论文题目 2010-03-03 18:58:17【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式


联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有