机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> [机电一体化]车床主轴箱箱体左侧8-M8螺纹攻丝机设计

[机电一体化]车床主轴箱箱体左侧8-M8螺纹攻丝机设计

本文ID:LW10157 字数:19175,页数:40

下载地址 全文下载链接(充值:118元) 如何充值?

[机电一体化]车床主轴箱箱体左侧8-M8螺纹攻丝机设计

论文编号:JX643    论文字数:19175,页数:40  附:任务书,开题报告

摘要
 目前,组合机床的需求量很大,国家鼓励其出口。而国内汽车工业的迅速发展也势必导致各类零部件加工量的增大。因此,组合机床可多刀、多轴、多面、多工位加工的优点就显得尤为突出。本设计就是在攻丝组合机床的设计基础上(比如攻丝加工设计、组合机床总体设计、夹具设计等),将PLC控制技术应用到其中,通过事先编制好的程序来实现攻丝加工要求,以便快速、简便地获得所要加工的零件。这种设计方案的优点在于所有被加工孔可一次加工完成,可大批大量生产,且生产时可实现无人加工或少部分人看管,也可进一步提高组合机床的自动化程度。

关键词:组合机床、攻丝、PLC控制技术、自动化


Abstract
 At present, the demand for the aggregate machine-tool is very big, the country encourages its exportation. But the rapid development of the domestic auto industry certainly will cause all kinds of spare parts to process the increase of quantity.  Therefore, the aggregate machine-tool may the multi-knives, multiple spindle, the multi-surface, the multi-locations processing merit appear for is still prominent. This design is in attacks the silk aggregate machine-tool in the design foundation (for instance to attack silk processing design, aggregate machine-tool system design, jig design and so on), applies the PLC control  technology to among, through the procedure which beforehand establishes realizes attacks the silk processing request, by fast, simple the components which obtains must process. This kind of design proposal merit lies in possesses is processed the hole to be possible a processing to complete, when large quantities of mass productions, also production may realize nobody processing or little the partial people safeguard, also may further enhance the aggregate machine-tool the automation.

Key words: The aggregate machine-tool,  attacks the silk,
  the PLC control technology,  the automation
 
 

目    录
前言  ...................................................................... 1
1.组合机床概述  ........................................................... 2
  1.1.组合机床及其特点  ................................................... 2
  1.2.攻丝组合机床的结构方案  ............................................. 3
  1.3.组合机床发展趋势  ................................................... 4
2.组合机床总体设计  ....................................................... 5
  2.1.组合机床方案确定  ................................................... 5
  2.2.确定切削用量  ....................................................... 6
  2.3.组合机床总体设计——三图一卡  ....................................... 7
3.组合机床夹具设计  .......................................................20
  3.1.机床夹具的用途及使用优点  ...........................................20
  3.2.定位支承系统设计  ...................................................20
  3.3.组合机床夹具设计  ...................................................21
  3.4.夹具总装配图技术要求制定  ...........................................22
4.多轴箱的设计 ........................................................... 23 
  4.1 绘制多轴箱设计原始依据图  ........................................... 23
  4.2 主轴结构型式的选择 .................................................24
  4.3 传动系统的设计与计算 ...............................................24  
5.PLC控制系统的设计  ....................................................27
  5.1.可编程控制器概述  .................................................27  
  5.2.动作循环图  .......................................................29
  5.3.端子分配图  .......................................................30
  5.4.梯形图设计  .........................................................31
  5.5.程序设计  ...........................................................34
6.组合机床电气控制电路设计  ...............................................35
  6.1.机床电气设计的基本原则  .............................................35
  6.2.机床传动的总体方案  .................................................36
  6.3.主电路设计  .........................................................36
  6.4.控制电路设计  .......................................................36
  6.5.控制电源的确定及总体电路的审核完善  .................................37
  6.6.电器元件的选择  .....................................................38
  6.7.电气位置图的绘制  ...................................................39
毕业设计总结  ............................................................. 41
致谢  ..................................................................... 42
参考资料  ................................................................. 43


[机电一体化]车床主轴箱箱体左侧8-M8螺纹攻丝机设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:[课程设计]汽车差速器及半轴设计 下一篇:[机电一体化]400型水溶膜流研成型..
推荐论文 本专业最新论文

点击查看关于 机电 一体化 车床 主轴 箱体 左侧 8-M8 螺纹 设计 的相关论文题目 2010-09-14 08:48:32【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有