机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 端盖落料拉深复合模设计及CAM

端盖落料拉深复合模设计及CAM

本文ID:LW10359 字数:12600.页数:46

下载地址 全文下载链接(充值:168元) 如何充值?

端盖落料拉深复合模设计及CAM

论文编号:JX651  论文字数:12600.页数:46 附任务书,开题报告,外文翻译,答辩PPT,CAD图纸

端盖落料拉深复合模设计及CAM.png端盖落料拉深复合模设计装配图.png

【摘要】随着中国工业不断地发展,模具行业也显得越来越重要。本文针对端盖的冲裁工艺性和拉深工艺性,分析比较了成形过程的三种不同冲压工艺(单工序、复合工序和连续工序),确定用一幅复合模完成落料、拉深的工序过程。介绍了端盖冷冲压成形过程,经过对端盖的批量生产、零件质量、零件结构以及使用要求的分析、研究,按照不降低使用性能为前提,将其确定为冲压件,用冲压方法完成零件的加工,且简要分析了坯料形状、尺寸,排样、裁板方案,拉深次数,冲压工序性质、数目和顺序的确定。进行了工艺力、压力中心、模具工作部分尺寸及公差的计算,并设计出模具。还具体分析了模具的主要零部件(如凸凹模、卸料装置、拉深凸模、垫板、凸模固定板等)的设计与制造,冲压设备的选用,凸凹模间隙调整和编制一个重要零件的加工工艺过程。列出了模具所需零件的详细清单,并给出了合理的装配图。通过充分利用现代模具制造技术对传统机械零件进行结构改进、优化设计、优化工艺方法能大幅度提高生产效率,这种方法对类似产品具有一定的借鉴作用。
 
【关键词】端盖;模具设计;复合模;落料拉深
 
 


Cover Blanking drawing Composite molding
Mold design and CAM

 [Abstract] With China's industries continue to develop and die industry is also becoming increasingly important. Based on the Cover of the stamping process and the deep drawing process, Comparative analysis of the process of forming three different stamping process (single processes, complex processes and continuous processes) confirm completion of a composite model blanking, drawing processes process. On the cover of the cold stamping process, right after the Cover of the mass production, quality components, and the use of structural components of the analysis, research, in line with lower performance prerequisite to the identification of stampings, Stamping method used to complete the processing components, and a brief analysis of the blank shape, size, layout, the Conference Board, the number of Drawing, stamping processes in nature, number and sequence determination. For the process, the center of pressure, the die size and the tolerance of the calculation, design mold. Also analyzes the mold of the main components (such as punch and die and dump devices, drawing punch, slates, Punch plate, etc.) design and manufacturing, stamping equipment selection, punch-gap adjustment and establishment of a vital parts machining process. Die requirements set out a detailed list of parts, and gives a reasonable assembly. By fully utilizing modern manufacturing technology to mold traditional mechanical parts for structural improvements, design optimization, Process optimization methods can greatly enhance production efficiency, the method of similar products have some reference.

 [Keywords] Cover; Mold design; Composite molding; Blanking drawing


目  录
1 分析零件的工艺性 1
2 确定工艺方案 3
2.1 计算毛坯尺寸 3
2.2 计算拉深次数 4
2.3 确定工艺方案 4
3 主要工艺参数的计算 5
3.1 计算工艺力、初选设备 5
4 模具的结构设计 11
4.1 模具结构形式的选择 11
4.2 模具工作部分尺寸计算 12
5 模具的整体安装 17
5.1 模具的总装配 17
5.2 模具零件 17
6 选定冲压设备 19
7 模具的装配 20
7.1 复合模的装配 20
7.2 凸、凹模间隙的调整 20
8 重要零件的加工工艺过程编制 21
9 垫板的CAM仿真加工 23
结论 33
参考文献 34
致  谢 35
附  录 36


端盖落料拉深复合模设计及CAM......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:赛豹车通风百叶窗总成双型腔注塑.. 下一篇:赛豹车中控盒后烟灰缸支架单型腔..
推荐论文 本专业最新论文

点击查看关于 复合 设计 CAM 的相关论文题目 2010-09-25 09:07:29【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有