机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 前后车圈冲孔模设计

前后车圈冲孔模设计

本文ID:LW10375 字数:12865.页数:26

下载地址 全文下载链接(充值:168元) 如何充值?

前后车圈冲孔模设计

论文编号:JX666  论文字数:12865.页数:26 附任务书,开题报告,外文翻译,答辩PPT,CAD图纸

前后车圈冲孔模设计.png前后车圈冲孔模设计装配图.png

【摘要】冲压制品已在工业,农业,国防和日常生活中的方面得到广泛应用,特别是在机械业中则为突出。机械产品的外壳大部分是冲压制品,产品性能的提高要求高素质的冲压模具和冲压性能,成型工艺和制品的设计。
 冲压制品的成型方法很多。其主要用于是冲孔,落料,弯曲,拉伸等。而冲压模,约占成型总数的60%以上。当然如利用电气控制,可实现半自动化或自动化作业。
 本文对前后车圈冲压技术的分类、特点及发展方向作了简略概述;论述了冲压零件的形成原理、基本模具结构与运动过程及其设计原理,对冲压件模具进行了设计,本文介绍的模具实例结构简单实用,使用方便可靠,对类似工件的大批量生产具有一定的参考作用。
 
【关键词】冲压、模具、机械、制造、模具设计


About ear piercing Die Design


英文摘要
【Abstract】 Stamping products has been extensively applied in the industry, agriculture, national defense and in the daily lives of area, especially in the machinery industry. Mechanical products is the most pressing housing products, and the improvement of product performance requires of high-quality performance stamping molds ,stamping,process and product design.
 There are many ways of molding products of stamping. Piercing is mainly used for blanking, bending, stretching, etc. And Stamping molds almost  form more than 60 percent of the total number. For example ,Electrical Control can be realized as semi-automatic or automatic operation.
 The article mainly discussed the Circlearound,feature and the developmental direction of the pnnching technology. Elaborated the punching  

components formation principle, the basic dies structure and the rate process and the principle of design; and designed some conventional 

punching die.  
 The dies here discussed can be easily made,conveniently used, and safely operated.And it could be used as the reference in the large scale

 production of similar workpieces.
【Key words】punching die ,machincal,manufacture,die design

目  录


前言 1
1 选题背景 3
1.1 题目来源 3
1.2 研究目的和意义 3
1.3 国内外研究现状、发展趋势及存在的主要问题 3
2.方案论证 8
2.1 零件加工工艺分析 8
2.2冲裁件的工艺性 10
2.3冲压力计算方法 11
2.4计算冲压力 13
2.5初选压力机 14
2.6凸凹模刃口尺寸计算 16
2.7、模具零件的结构设计 17
2.8冲压模具材料的选择 18
3冲压模具的安装、调试和日常维护 20
3.1 模具安装的一般顺序: 20
3.2 冲模的试冲和调整 20
4总结 21
参考文献 21
致 谢 23


前后车圈冲孔模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:赛豹车工具箱盖加强件单型腔注塑.. 下一篇:路宝车锁拉线扣手注射模设计
推荐论文 本专业最新论文

点击查看关于 前后 车圈冲 孔模 设计 的相关论文题目 2010-09-26 08:20:26【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有