机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 内燃机水箱注塑模设计

内燃机水箱注塑模设计

本文ID:LW10426 字数:13574.页数:34

下载地址 全文下载链接(充值:168元) 如何充值?

内燃机水箱注塑模设计

论文编号:JX672  论文字数:13574.页数:34 附任务书,开题报告,外文翻译,答辩PPT,CAD图纸

内燃机水箱注塑模设计.png内燃机水箱注塑模设计装配图.png

[摘要]塑料工业是当今世界上增长最快的工业门类之一,而注塑模具是其中发展较快的种类,因此,研究注塑模具对了解塑料产品的生产过程和提高产品质量有很大意义。
 本设计介绍了注射成型的基本原理,注射模具的结构与工作原理,对注塑产品提出了基本的设计原则;介绍了冷流道注射模具浇注系统、温度调节系统和顶出系统的设计过程,并对模具强度要求做了说明;最后介绍了当今世界上最为普及的三维CAD/CAM系统标准软件PRO/ENGNEER的PROGRAM模块,对导柱和导套进行了参数化设计。
 通过本设计,可以对注塑模具有一个初步的认识,注意到设计中的某些细节问题,了解模具结构及工作原理;通过对PROGRAM的学习,可以建立较简单零件的零件库,从而有效的提高工作效率。
[关键词]塑料模具;聚丙烯;参数化
 
 
 
The plastic injection modle design of Internal-combustion tank
英文摘要

[Abstract] plastic industry is in the world grows now one of quickest industry classes, but casts the mold is development quick type, therefore, the research casts the mold to understand the plastic product the production process and improves the product quality to have the very big significance.
 This design introduced the injection takes shape the basic principle, specially single is divided the profile to inject the mold the structure and the principle of work, to cast the product to propose the basic principle of design; Introduced in detail the cold flow channel injection evil spirit mold pours the system, the temperature control system and goes against the system the design process, and has given the explanation to the mold intensity request; Finally introduced now in the world the most popular three dimensional CAD/CAM system standard software PRO/ENGNEER's PROGRAM module, and led the wrap to the guide pillar to carry on the parametrization design.
[Key words]Plastic mold;Polypropylene;parametric

目  录


1 前言 1
1.1蓬勃发展的模具工业 1
1.2塑料模具工业的现状和技术的主要发展方向 1
2 模具结构形式的拟定 4
2.1确定型腔数量及排列方式 4
2.2模具结构形式的确定 4
3 内燃机水箱注塑模的设计 6
3.1塑料制件工艺性分析及材料参数 6
3.2型腔数目和塑件质量 7
3.3型腔、型芯工作部位尺寸的确定 8
3.4分型面位置的确定 9
3.5浇注系统的设计 10
3.6浇口的设计 10
3.7注射机的初选 13
3.8注射机的校核 15
3.9侧抽芯机构设计 15
3.10导向与定位机构的设计 16
3.11脱模推出机构的设计 17
3.12冷却系统设计 18
3.13排气系统的设计 19
3.14模具装配图 19
参考文献 21
致谢 22


内燃机水箱注塑模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:锐意车左后视镜盖双型腔注塑模设计 下一篇:锐意车工具箱盖双型腔注射模模具..
推荐论文 本专业最新论文

点击查看关于 内燃机 水箱 注塑模 设计 的相关论文题目 2010-09-27 08:17:15【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有