机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 贮油杯盖注塑模设计

贮油杯盖注塑模设计

本文ID:LW10430 字数:14699.页数:29

下载地址 全文下载链接(充值:168元) 如何充值?

贮油杯盖注塑模设计

论文编号:JX676  论文字数:14699.页数:29 附任务书,开题报告,外文翻译,答辩PPT,CAD图纸

贮油杯盖注塑模设计.png贮油杯盖注塑模设计装配图.png

【摘要】塑料工业是当今世界上增长最快的工业门类之一,而注塑模具是其中发展较快的种类,因此,研究注塑模具对了解塑料产品的生产过程和提高产品质量有很大意义。
 本设计介绍了注射成型的基本原理,特别是单分型面注射模具的结构与工作原理,对注塑产品提出了基本的设计原则;详细介绍了冷流道注射模具浇注系统、温度调节系统和顶出系统的设计过程,并对模具强度要求做了说明;通过本设计,可以对注塑模具有一个初步的认识,注意到设计中的某些细节问题,了解模具结构及工作原理。
【关键词】塑料模具、分型面、标准
 

The plastic injection mold design of the lid of Oil storage
英文摘要
[Abstract]: Now the plastics industry is one of the growing quickest industry classes in the world, but the injection mold is develops the quick type. Therefore, There have biggest significance to research injection mold to understood that the plastic of production process and improve the product quality.
 This design introduced the basic principle of injection molding, specially single is divided the profile to inject molds structure and the principle of work, That proposes the basic design principle of products; Introduced the details of the system that are cold flow channel injection of mold gating、the temperature control system and the design process of going against system, and has given the explanation to the mold intensity request; Through this design, may to cast the mold to have a preliminary understanding, notes some certain detail questions in design, understands the mold structure and the principle of working.

[Key Words]: The plastic Mold Parting Line  Standard

 

目  录


1前言  1
1.1模具工业在国民经济中的地位  1
1.2 我国模具技术的现状及发展趋势  2
2 塑件的成形工艺性分析  4
2.1 塑件材料的选择及其结构分析  4
2.2 ABS的注射成型工艺  4
2.3 ABS性能分析  5
2.4 ABS成型塑件的主要缺陷及消除措施:  6
3 模具结构形式的拟定  7
3.1 确定分型面  7
3.2 确定型腔数量及排列方式  9
3.3 模具结构形式的确定  9
4 注塑机的选择和有关工艺参数的校核  11
4.1 所需注射量的计算  11
4.2 注射机型号的确定  11
4.3 注射机及参数量校核  12
5 浇注系统的形式和浇口的设计  14
5.1 主流道的设计  14
5.2 分流道设计  15
5.3 浇口的设计  16
6 冷却系统设计  19
7 脱模推出机构设计  20
7.1 脱模阻力计算  20
7.2 主要推出零件的设计  21
8 成型零件结构与尺寸设计  22
8.1 成型零件的选材  22
8.2 凹模部分的结构设计  23
8.3 凸模部分的结构设计  24
9 设计总结  25
参考文献  26
致  谢  27


贮油杯盖注塑模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:赛马车A底大风扇叶双型腔注塑模设.. 下一篇:赛豹车锁拉线扣手双型腔注塑模设计
推荐论文 本专业最新论文

点击查看关于 注塑模 设计 的相关论文题目 2010-09-27 08:34:16【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有