机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 锅炉掏煤往复机械的设计

锅炉掏煤往复机械的设计

本文ID:LW15241 字数:7046.页数:31

下载地址 全文下载链接(充值:168元) 如何充值?

锅炉掏煤往复机械的设计

论文编号:JX711  论文字数:7046.页数:31   附CAD图

锅炉掏煤往复机械的设计.png

摘      要
 这次毕业设计主要是改进以前的锅炉掏煤设备在使用过程中存在的不足之处。例如传动噪音很大,传动效率低等缺点。为改进这些方面的不足,而且还要增加能够自动摆角这一功能,所以我们要对该产品进行改进设计。这次的设计主要是要完成往复机构和摆角机构的设计以及完成总体设计并绘制总装图及零件图。
 通过设计任务分析,及一定的市场调查,完成了对该产品的改进设计,绘制了,装配图及零件图,很好的解决原产品的设计缺陷,达到要求的设计任务。这次的毕业设计使我们的综合知识运用能力有了一个质的提高,将为我们以后走上工作岗位打下坚实的基础。


关键词:锅炉  掏煤  往复运动 设计

Cutting coal boiler design of reciprocating machinery
Abstract
 The graduation project is mainly to improve on the previous dig coal boiler equipment during use existing deficiencies. For example, noisy transmission, transmission efficiency is low point. In order to improve these deficiencies, but also to increase the ability to automatically tilt angle of this function, so we need to improve the product design. The key is to complete the design of institutions and the tilt angle reciprocating mechanism design and completion of the design and the mapping of assembly drawings and part drawings.     Through the design task analysis, and some market research done to improve the product design, drawing, and assembly drawings and parts diagram, a very good solution to the original product design defect, the required design tasks. The graduation project so that our ability to have a comprehensive knowledge of the use of quality improvement, since we go to work for a solid foundation.

 Keywords:Boiler  Cutting coal  Reciprocating motion  Design

目 录
摘      要 I
Abstract II
目录...............................................................Ⅲ
第一章  绪论 1
1.1研究的动机与目的 1
1.2 研究背景 1
1.3研究方法与系统描述 2
1.4论文内容概述 2
第二章 功能分析 3
第三章 总体方案确定 4
3.1往复运动机构设计 4
3.2摆动设计: 6
3.3往复运动支承设计 7
3.4 总体设计 9
第四章 电动推杆选择 11
4.1电动推杆的选型 11
4.2电动推杆的连接设计: 12
第五章  凸轮设计计算 13
5.1凸轮运动规律选择 13
5.2凸轮曲线设计: 13
5.3凸轮零件设计: 14
5.4滚轮及支架设计: 14
第六章直线轴承选择设计 16
6.1推杆及轴承设计计算: 16
6.2直线轴承的固定 16
6.3选择直线轴承: 17
第七章  其他零部件设计 18
7.1机架设计 18
7.2电动推杆安装板设计 19
7.3凸轮,轴承座安装板设计: 19
第八章  结论 21
参考文献 22
致谢 23
附 录 24


锅炉掏煤往复机械的设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:简易甘蔗去皮机 下一篇:YOX360限矩式液力偶合器设计
推荐论文 本专业最新论文

点击查看关于 锅炉 往复 机械 设计 的相关论文题目 2011-03-26 09:05:35【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有