机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 电梯拆装实训模型主体部分设计

电梯拆装实训模型主体部分设计

本文ID:LW15304 字数:10548.页数:28

下载地址 全文下载链接(充值:168元) 如何充值?

电梯拆装实训模型主体部分设计

论文编号:JX724  论文字数:10548.页数:28   附CAD图

电梯拆装实训模型主体部分设计.png

摘     要

 本课题为在校申报自制实验、实训设备项目的一部分。意在通过电梯拆装实训模型,给本校学生提供更加丰富优越的实训机会,提高学生的专业技能,为“应用型人才”打下良好的基础。另一方面,可以降低就业的成本和风险,增加就业的机会。
 主体部分的设计主要包括机架与井道、引导系统、对重装置、驱动装置、控制系统、安全装置的结构设计。机架材料采用铝合金正方形管,导轨采用铝合金矩形管具有很好的刚性。机架由50根3种形态构件搭建而成,各连接处由专门设计的连接板、角铝、村套连接,只用了M10×55、M10×70、M3×10三种内六角螺栓和配套螺母、平垫、弹垫,保证了机架的易拆装性、可调性和安全性。电梯高2000mm,正面宽900mm,厚600mm,分四层。按照真实电梯的五分之一大小制作。最大构件尺寸小于700mm,方便装箱保管。
 本设计充分运用了PROE产品设计模块,不管在整体还是细节上,设计思路都能更加形象地表达出来。尤其在装配的环境下进行设计,各构件的设计相辅相成,避免了很多尺寸的干涉,大大减少了造型时间。
关键词:实训 电梯 主体 机架 拆装 铝合金

The design of elevator removable training model(main part)


Abstract
 The subject is part of the school self-reporting of experiment , training equipment project. It intends to provide more superior training opportunities and improve the professional skills of our students, as "applied talents" lay a good foundation. On the other hand, it can reduce the costs and risks of employment, increasing employment opportunities.
 The design of the main frame includes frame and shaft, guidance systems, heavy equipment, drives equipment, control systems,safety devices, the structure design. Aluminum square tube frame materials, aluminum rectangular tube guide has a good rigidity. Rack from the 50 built with 3 forms of elements, each junction by a specially designed interconnect, angle aluminum, the village set connection, only use M10 × 55, M10 × 70, M3 × 10 3 kinds of hex bolts and nut, flat pad, spring pad, ensuring ease of disassembly of the rack, adjustable and security. Lift high 2000mm, front width 980mm, thickness 680mm, four layers. One-fifth of the elevator according to the true size to production. The maximum component size of less than 700mm, convenient packing custody.
 The design of the full use of the PROE product design module, whether in whole or details, design ideas can be expressed even more vividly. Environment, particularly in assembly design, the design of all components complement each other to avoid interference with many dimensions, greatly reducing the modeling time.
Keywords: Training;elevator;Main frame;Removable;Aluminum

目  录
中文摘要 
英文摘要 
目  录 
第一章 绪论 1
第二章 电梯类型的选择 2
2.1   常见的电梯类型 2
2.1.1   按用途分类 2
2.1.2   按速度分类 3
2.1.3   按驱动方式分类 3
2.2   电梯类型的确定 3
小结 3
第三章 总体方案设计 4
3.1   基本功能特点 4
3.2   结构设计 4
3.3   总体方案确定 6
3.3.1   构件连接方式的确定 6
小结 9
第四章 主体构件设计 10
4.1   构件1设计 10
4.1.1   材料的选择 10
4.1.2   计算校核 11
4.1.3   侧面孔设计 11
4.2   构件2设计 11
4.2.1   材料的选择 12
4.2.2   构件2特点 12
4.2.3   计算校核 12
4.2.4   侧面孔设计 13
4.3   构件3设计 13
4.3.1 构件3特点 14
4.3.2   材料的选择 14
4.3.3   计算校核 15
4.4   构件连接 15
4.4.1   立柱的构成 15
4.4.2   不同向构件连接 15
小结 16
第五章 导轨、导靴、对重设计 17
5.1   导轨 17
5.1.1   导轨调节装置设计 17
5.2   导靴 18
5.2.1   导靴结构形式的确定 18
5.3   对重 19
小结 20
第六章 总结 21
参考文献 23
致 谢 24


电梯拆装实训模型主体部分设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:电子裁判军棋的设计 下一篇:点云反求造型设计—汽车零部件
推荐论文 本专业最新论文

点击查看关于 电梯 拆装 模型 主体 部分 设计 的相关论文题目 2011-03-26 10:56:56【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有