机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 落锤式油压缓冲器性能实验台控制系统设计

落锤式油压缓冲器性能实验台控制系统设计

本文ID:LW15376 字数:11275.页数:28

下载地址 全文下载链接(充值:168元) 如何充值?

落锤式油压缓冲器性能实验台控制系统设计

论文编号:JX738  论文字数:11275.页数:28   附CAD图

落锤式油压缓冲器性能实验台控制系统设计.png

 摘     要
 目前,液压缓冲器在高速化、自动化的生产线上,在工程机械、交通运输工具以及轻工、纺织机械上液压缓冲器都被广泛地应用。创建一个液压缓冲器性能测试实验台,用于检测液压缓冲器性能,必将有重要的意义。
 本文设计的试验台是采用落锤式油压缓冲器性能试验台,并对试验台的控制部分的结构组成,工作流程和电路设计作了介绍。试验台主要由一个带动冲击块上升的步进电机,吸附及分离冲击块的电磁离合器,收集碰撞时信号的力和位移传感器和冲击块上升导轨丝杠组成。碰撞发生后,经数据采集卡采集经工控机程序调控处理测得力和位移信息描绘F-S曲线。该试验台具有内部硬件磨损小,试验安全系数高,操作简单,得到数据报告详细等特点。
 
关键词:    冲击  液压缓冲器  控制系统 落锤式
 
 
 
Control system design of falling weight hydraulic buffer performance test-bed
Abstract
 At present, the hydraulic buffers in high-speed, automated production line, in the engineering machinery, transport vehicles, as well as light industry, textile machinery on the hydraulic buffers have been widely used. Buffer to create a performance test of hydraulic test rig for testing the performance of hydraulic buffer is bound to have important significance
 In this paper, the design of the test bed is falling weight test stand hydraulic buffer performance, and test-bed part of the control structure, work processes and circuit design are introduced. Test-driven mainly by an increase in the impact of the stepper motor block, adsorption and separation of the impact of the electromagnetic clutch block to collect a collision signal and block displacement sensors and the impact of increased rail screw component. After the collision, the data acquisition card collection procedures by the IPC to deal with measurement control information describing effective and displacement curve FS. The test-bed with internal hardware wear small, high-test safety factor, simple operation, the report details the characteristics of data.
Key words: impact;hydraulic buffers;control System;falling weight

 

目 录
摘     要 i
英文摘要 ii
目 录 iii
第一章 绪论 1
1.1目前国内外研制的新型缓冲器的几种型式 1
1.2我国缓冲器与国外缓冲器的比较 1
1.3缓冲器的发展趋势 2
1.4本章小结 2
第二章 液压缓冲器结构及基本原理 1
2.1缓冲器的分类 1
2.2液压缓冲器的结构特点及基本原理 1
2.3 本章小结 3
第三章 液压缓冲器特性研究 4
3.1影响缓冲器的重要参数 4
3.2液压缓冲器的特性研究 4
3.3综合特性计算 9
3.4本章小结 10
第四章 落锤式油压实验台设计 11
4.1系统检测原理 11
4.2落锤式油压缓冲器性能试验台 11
4.3控制系统电路设计 16
4.4检测流程 18
4.4本章小结 19
第五章 结论 20
5.1工作总结 20
致  谢 21
参考文献 22


落锤式油压缓冲器性能实验台控制系统设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:门式起重机的设计与计算 下一篇:简易油缸打压试验台设计
推荐论文 本专业最新论文

点击查看关于 油压 缓冲器 性能 实验 控制系统 设计 的相关论文题目 2011-03-26 14:17:52【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有