机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 车辆油液减振器的设计

车辆油液减振器的设计

本文ID:LW15563 字数:15006.页数:29

下载地址 全文下载链接(充值:118元) 如何充值?

车辆油液减振器的设计

论文编号:JX786  论文字数:15006.页数:29   附JPG图(不可修改)

车辆油液减振器的设计文件截图.png

摘     要
 
 减振器主要是用于减小或消弱振动对设备与人员影响的一个部件。它起到衰减和吸收振动的作用,使得某些设备及人员免受不良振动的影响,起到保护设备正常工作及人员安全的作用,因此它广泛应用于各种机床、汽车、摩托车、火车、轮船、飞机及坦克等装备。
 减振器是保障车辆运行安全和提高旅客舒适度的重要部件,尤其对于高速运行的车辆,没有减振器就无法运行。减振器性能的好坏对车辆的舒适性以及车辆及悬架系统的使用寿命等有较大影响。由于双向作用筒式油液减振器质量轻、性能稳定、工作可靠,摩擦也小等优点,目前汽车上广泛采用双向作用筒式油液减振器。本文主要针对双向作用筒式油液减振器进行设计,查找相关资料,确定出减振器的相对阻尼系数,阻尼系数,最大卸荷力,工作缸直径等。在计算过程中对其阻尼力进行分析、验算,并对相关零部件进行校核。最后用AUTOCAD画出减振器各零部件及其装配图。
 
 
 
关键词:汽车 双向作用筒式油液减振器 参数设计 阻尼力 分析
The Design of Oil Shock Absorber for Vehicle


Abstract
 Shock absorber is a component which mainly used to reduce or weaken the impact of vibration on the equipment and personnel. It plays the role of attenuating and absorbing vibration. It can make certain that equipment and personnel are far away from the harmful effects of vibration. Also it can keep the normal work and personnel safe. So it is widely used in various machines, such as automobile, motorcycle, trains, ships, aircraft and other equipment.
 Shock absorber is the important part which guarantee to improve operational safety and comfort. Especially for high-speed operation of vehicles, without shock absorber vehicles could not run. The performance of shock absorber has great impact on comfort of vehicles and using life of suspension system. This paper designed double-cylinder hydraulic shock absorber. Because of its advantages, such as light quality, stable performance, reliability. Now, double-cylinder hydraulic shock absorber is widely used in vehicles. I will search relevant material and determine the coefficient, such as relative coefficient, damping coefficient, the maximum force of unloading, working cylinder bore and so on. Process in the calculation of shock absorber, I will check and analyze the dampering force, also I will check the related parts. Finally, I will use AUTOCAD to draw the components and assembly of shock absorber.

 

 Keywords:vehicle; double-cylinder hydraulic shock absorber; parameter design; damping force; analyse 
目  录
中文摘要 i
英文摘要 ii
目录 iii
第一章     绪论 1
1.1  研究动机与目的 1
1.2  研究背景 1
1.3  研究方法与系统描述 2
1.4  论文內容概述 2
第二章     减振器基础知识 3
2.1   减振器的作用及分类 3
2.2   油液减振器的工作要求及结构原理 4
2.3   双向作用筒式油液减振器 5
第三章     双向作用筒式油液减振器设计 7
3.1   双向作用筒式油液减振器的类型 7
3.2   双向作用筒式油液减振器参数选用与结构设计 7
3.3   双向作用筒式油液减振器主要结构尺寸的确定与校核 15
第四章     减振器设计结果及验算分析 20
4.1   减振器阻尼力的描述 20
4.2   减振器设计结果 21
4.3   液减振器结果分析 21
第五章     结论 23
致谢 24
参考文献 25
附录:双向作用筒式油液减振器主要零件图及装配图(另附)


车辆油液减振器的设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:电动汽车空调系统设计 下一篇:车辆轮胎清洗泥水分离设备的设计
推荐论文 本专业最新论文

点击查看关于 车辆 设计 的相关论文题目 2011-03-27 08:59:59【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有