机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 轿车盘式制动器设计及性能计算

轿车盘式制动器设计及性能计算

本文ID:LW15574 字数:14191.页数:32

下载地址 全文下载链接(充值:168元) 如何充值?

轿车盘式制动器设计及性能计算

论文编号:JX790  论文字数:14191.页数:32   附CAD图

轿车盘式制动器设计及性能计算文件截图.png轿车盘式制动器设计装配图.png

摘    要
 国内汽车市场迅速发展,而轿车是汽车发展的方向。然而随着汽车保有量的增加,带来的安全问题也越来越引起人们的注意,而制动系统则是汽车主动安全的重要系统之一。因此,如何开发出高性能的制动系统,为安全行驶提供保障是我们要解决的主要问题。盘式制动器作为鼓式制动器的替代产品,具有热稳定性好、反应灵敏等优势,但是盘式制动器本身也存在一些问题,并且鼓式制动器存在的一些问题,虽然盘式制动器有一定程度改善,但并未得到完全解决,如热衰退、制动噪声等。
 本设计首先介绍了盘式制动器的设计背景和意义,然后是发展现状和趋势,研究方法。通过对轿车盘式制动器的深入学习和设计实践,主要是对轿车盘式制动器的零部件结构选型及设计计算,更好地学习并掌握盘式制动器的结构原理与设计计算的相关知识和方法。除此之外还介绍了盘式制动器的各种类型,性能等,分析了盘式制动器和摩擦衬片的特性。
关键词:  盘式制动器;  设计;  性能分析
 The Design and Calculation of Disk Brake


Abstract
   The rapid development of the domestic auto market, while the car is the car development. However, with the increase in car ownership has brought the security issues has drawn increasing attention, while the braking system is important in automotive active safety systems in the world. Therefore, how to develop high-performance braking system to provide protection for the safe driving is the main problem to be solved. Disc brake drum brake as an alternative product with good thermal stability, and sensitivity advantages of disc brakes themselves, but there are some problems and some problems drum brake, disc brake although a certain degree improved but have not been fully resolved, such as thermal recession, brake noise.
 This paper illustrated disc brake’s development at beginning, then the design’s background, quality and mission. Through the disc brake in-depth study and design practice, mainly for car’s disc brake structure selection and design calculation, can better study and master the disc brake structure and working principle and the related knowledge and methods. Introduce the brake disc’s kind and performance. Analyze the disc brake and rub linings’ behavior.
 
Key words: disc brake; design; Performance Analysis

目录
摘要 i
abstract ii
目录 iii
第一章 绪论 1
1.1  设计的背景和意义 1
1.2  盘式制动器的发展现状和趋势 1
1.3  研究的方法 3
1.4  论文内容概述 3
第二章 盘式制动器的概述 4
2.1  盘式制动器的类型 4
2.2 盘式制动器的优缺点 8
第三章 盘式制动器的设计 10
3.1盘式制动器的设计要求 10
3.2 制动器性能参数的选择及设计计算效验 11
3.3 盘式制动器的主要参数确定 18
3.4  盘式制动器制动力矩的计算 20
3.5 摩擦衬片(衬块)的磨损特性计算 21
3.6 制动距离的校核 22
3.7 制动器主要零件的结构设计 23
第四章 结论 26
致  谢 27
参考文献 28


轿车盘式制动器设计及性能计算......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:轿车制动系统设计与计算 下一篇:激振器用液压缸设计
推荐论文 本专业最新论文

点击查看关于 轿车 盘式 制动器 设计 性能 计算 的相关论文题目 2011-03-27 09:14:33【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有