机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 施工车辆轮胎清洗设备用水系统的设计

施工车辆轮胎清洗设备用水系统的设计

本文ID:LW15605 字数:11096.页数:24

下载地址 全文下载链接(充值:168元) 如何充值?

施工车辆轮胎清洗设备用水系统的设计

论文编号:JX802  论文字数:11096.页数:24   附CAD图

施工车辆轮胎清洗设备用水系统的设计文件截图.png

摘     要
 
 针对目前建筑工地对社会的污染源之一的施工车辆进出工地时车轮上的淤泥通过人工方式不能及时的清理干净,并且消耗大量的水资源。本论文以此为背景,在国内该设备的技术尚不成熟之时,学习并运用了国外的设计理念。并且在经过了社会上的现场调查,获得工地操作人员的宝贵经验之后设计该施工车辆轮胎清洗设备。我在设计中着重于对系统的支撑结构,水槽中的三角铁的分布,喷嘴的流量,喷射系统的分布和泵的选择进行了设计和校核。国内技术的不成熟使得在设计中我们采用了实践、经验与理论相结合的方法。在设计的多处自己进行符合中国车辆的设计、计算和校核。并且最终设计出该设备。


关键词:车辆轮胎   清洗设备  喷嘴  设计


The Design of Washing System for Construction Vehicle Tire-cleaning Equipment

Abstract
  The construction vehicles which go and forth between the constructions site and cities have become one of the pollution source to the society. If the mud on the wheels can not be manually cleaned in time, it will also consume a large amount of water. Since the equipment in China is premature, some foreign designs can be learned and applied, which is the background of the article. And the wheel cleaning equipment is designed after we got some valuable experience by the full investigation in the construction site. I concentrate on the supporting structure system in my design. The distributions of triangle iron in the sink, nozzle flow, the distributions of injection system and selection of pump have been designed and proofread. As the premature technology in China, we combine the practice with the experience and theory. And we try our best to make the design fit the vehicles in China by some design, calculation and proofreading. And the equipment is designed eventually.

Keywords: wheels; washing-machine; nozzle; design

目  录
中文摘要 i
英文摘要 ii
第一章  绪论 1
 1.1  设计目的与意义 1
 1.2  国内外发展现状 2
 1.3  论文內容概述 3
第二章  施工车辆轮胎清洗设备的总体设计 4
 2.1  支撑系统整体设计 4
 2.2  清洗系统总体设计 5
 2.3  控制系统方案设计 6
第三章  清洗设备水系统的参数设计 7
 3.1  喷嘴的选用 7
 3.2  泵的参数计算与选择 17
第四章  总结 19
参考文献 20
致谢 21


施工车辆轮胎清洗设备用水系统的设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:汽车筒式减振器双动耐久试验台机.. 下一篇:软轴驱动式汽车自动窗帘设计
推荐论文 本专业最新论文

点击查看关于 施工 车辆 轮胎 清洗设备 用水 系统 设计 的相关论文题目 2011-03-27 09:52:06【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有