机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 小型挖掘机工作装置设计

小型挖掘机工作装置设计

本文ID:LW15619 字数:12162.页数:42

下载地址 全文下载链接(充值:168元) 如何充值?

小型挖掘机工作装置设计

论文编号:JX809  论文字数:12162.页数:42   附CAD图

小型挖掘机工作装置设计文件截图.png

 摘   要

 本论文主要是利用小型单斗液压挖掘机的原始基础数据,利用经验统计公式,旋转矢量法及力学计算对挖掘机工作装置中的动臂,斗杆,铲斗,销轴,连杆机构等进行设计.在本论文中先对工作装置中的各个机构进行结构初步选择确定和位置布置以及原始数据的确定.接着通过对整个装置进行简化处理,绘制出工作机构总的的模型图后对动臂,斗杆等各组成机构进行运动学分析,分析后通过计算确定各机构的基本尺寸.然后通过对各个机构在不同工况或者特殊极限工况下的受力分析和计算进行结构设计并确定各个尺寸参数.最后在确定销轴和螺栓等标准件的选用后完成此次设计.


关键词:  挖掘机  结构   受力分析   经验公式

The Structural Design of Small Excavator

Abstract
 This paper is mainly to design the Work installment of excavator in the : Moves arm, Doo-under bucket, Pin, connecting rod Institutions based on using the original data of small  excavators and the Empirical formula,the Revolving vector method ,also the Mechanics computation. In this paper on the first working device in the structure of the various agencies to identify and select the initial location and layout of the original data set. Second through the whole device can be simplified treatment, to map out the work of the agency after the model of the boom, the various components, such as Doo-bodies kinematics analysis, the analysis determined by calculating the size of the basic institutions. And then, strenuously, accepting passing to each organization under different working condition or peculiar limit working condition analyses and calculates the parameter carrying out physical design and ascertaining each dimensions.At last accomplish this design behind selecting and using ascertaining standard pieces such as axis pin and bolt.

Keywords:  Excavator,  Structure ,  Stress analysis,  Empirical formula

目录
中文摘要  i
英文摘要  ii
目录  iii
第一章  绪论 1
1.1课题背景及目的 1
1.2国内外研究状况 1
1.3论文构成及研究内容 1
第二章 总体方案设计 3
2.1 工作装置构成 3
2.2 动臂及斗杆的结构形式 5
2.3 动臂油缸与铲斗油缸的布置 5
第三章  工作装置运动学分析 7
3.1 动臂运动分析 7
3.2 斗杆的运动分析 8
3.3 铲斗的运动分析 9
第四章  基本尺寸的确定 14
4.1 斗形参数的确定 14
4.2 动臂机构参数的选择 14
4.3斗杆机构基本参数的选择  20
4.4 铲斗机构基本参数的选择 20
第五章 工作装置结构设计 24
5.1斗杆的结构设计 24
5.2动臂结构设计 35
第六章  销轴与衬套的设计 49
6.1 销轴的设计 49
6.2 销轴用螺栓的设计 49
6.3 衬套的设计 49
第七章  总结 51
参考文献 52
致谢 53


小型挖掘机工作装置设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:摇臂式汽车电动后窗帘传动设计 下一篇:小型汽车检测站设计
推荐论文 本专业最新论文

点击查看关于 小型 挖掘机 工作 装置 设计 的相关论文题目 2011-03-27 10:13:48【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有