机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 汽车纵梁冲孔模具设计

汽车纵梁冲孔模具设计

本文ID:LW15689 字数:12670.页数:31

下载地址 全文下载链接(充值:168元) 如何充值?

汽车纵梁冲孔模具设计

论文编号:JX836  论文字数:12670.页数:31   附CAD图

汽车纵梁冲孔模具设计所有文件.png

汽车纵梁冲孔模具装配图.png汽车纵梁冲孔模具零件图.png

 摘     要
 
 汽车纵梁因其外形尺寸较长,受加工设备的限制,制造难度很大。本文通过对纵梁生产工艺分析及模具设计,掌握模具设计的理论及方法。
 本文通过研究厚板冲裁特性来设计汽车纵梁冲孔模具,厚板冲裁方法与薄板冲裁方法基本相同。于薄板相比 ,厚板冲裁有其独特的特点 ,包括冲裁间隙、模具设计、冲件质量等方面。汽车纵梁冲件料厚6mm,冲孔在一条直线上,中心距较小,所以要考虑孔边缘最短距离。设计凹凸模和其固定板时要留足够余量,防止干涉。
 关键词:厚板冲裁 冲孔 中心距 汽车纵梁 固定板
 
  
The Punching Tool Design of Automotive Longitudinal Bean
Abstract
 The manufacting of Automotive longitudinal bean is very difficult because of its long outline dimension and was limited by processing equipment. By analysing of longitudinal production process and mold design can we predominate die design theory and methods.
 This article is primarily designed for Automotive longitudinal bean by analysising blanking plate feature , material and sheet metal blanking blanking method is basically the same method. Only compared with the sheet, plate blanking process have its own unique characteristics, blanking clearance, tool design, stamping quality. The pieces of material thickness tolerance requirements for the 6mm size is not Rigorous. Punching is in a straight line .the center distance is small, therefore,I have to consider the minimum distance of the edge of holes.I keep enough margin when design model and the fixed bump plate to prevent the hard interference.
 
Keywords: Blanking plate  Piercing  Center distance  Automotive longitudinal bean
          Bump plate
目  录
摘     要 I
Abstract II
目  录 III
第一章  绪论 1
1.1  概述 1
1.2  冲压的特点 1
1.3  冲压模具分类 2
1.4 冲压现状和发展方向 
1.5  国内汽车冲压技术的发展现状 5
1.6  我国冲压模具工业发展趋势 6
1.7  汽车纵梁冲孔重要性 7
第二章  汽车纵梁零件工艺性分析 9
2.1  分析汽车纵梁零件的工艺 9
第三章  汽车纵梁冲孔模具压力中心计算 10
3.1  冲压力的计算: 1
第四章  汽车纵梁冲孔模具尺寸的计算 14
4.1  冲裁工艺尺寸的计算 14
4.2  冲裁间隙的确定 14
4.3  冲裁凸、凹模刃口尺寸的计算 15
第五章 汽车纵梁冲孔模具结构的设计 16
5.1  汽车纵梁冲孔模具总体结构形式及工作过程 16
5.2  工艺零件的设计 17
5.3  汽车纵梁冲孔模具辅助装置的设计 20
5.4  汽车纵梁冲孔模具卸料装置的设计 22
5.5  汽车纵梁冲孔模具模架的选用 23
5.6  汽车纵梁冲孔模具所需压力机的选择 25
结  论 26
参 考 文 献 27
致  谢 28


汽车纵梁冲孔模具设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:手机外覆盖件(下盖)造型设计及注.. 下一篇:汽车驾驶室储物盒锁扣注塑模具设计
推荐论文 本专业最新论文

点击查看关于 汽车 模具设计 的相关论文题目 2011-03-27 12:59:23【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有