机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 压力机自动送料及冲压模设计

压力机自动送料及冲压模设计

本文ID:LW15695 字数:10557.页数:28

下载地址 全文下载链接(充值:168元) 如何充值?

压力机自动送料及冲压模设计

论文编号:JX842  论文字数:10557.页数:28   附CAD图

压力机自动送料及冲压模设计文件截图.png压力机自动送料及冲压模装配图.png压力机自动送料及冲压模零件图.png

 

摘   要
 冲压是靠压力机和模具对板材、带材、管材和型材等施加外力,使之产生塑性变形或分离,从而获得所需形状和尺寸的工件(冲压件)的成形加工方法。冲压和锻造同属塑性加工(或称压力加工),合称锻压。冲压的坯料主要是热轧和冷轧的钢板和钢带。
 送料机构通过两个辊轴的摩擦来实现板料的送进。两辊轴的之间的距离可以通过从动辊两端的紧定螺钉调节。
 送入新的板料前,先松开从动辊两端的紧定螺钉,然后将两滚筒的间距调大,送入板料。板料送入后拧紧紧定螺钉,使两滚筒压紧板料。
 板料压紧后,送料装置可以在冲床带轮的带动下进行自动送料。冲床带轮带动齿条上下移动(偏心轮结构),冲头上行时带轮带动齿条下行,齿条通过传动轴上的齿轮,由单向超越离合器将动力传给传动轴,带动传动轴转动,再由传动轴上的斜齿轮带动送料辊送料一次。
 卷料筒一端的支架是固定的,另一端的支架可以沿导轨移动。导轨内装有滚柱,支架和滚柱相接触,通过滚柱的滚动实现支架的平移。导轨的侧面有定位螺钉,可以将支架固定在一个合适的位置上。


关键词: 自动送料  冲压模  设计

Automatic feed presses and stamping die design


Abstract
 By stamping presses and die on the plates, strips, tubes and profiles, such as imposed by external forces, to produce plastic deformation or separation in order to obtain the required shape and size of the workpiece (stamping) of the forming process. Stamping and forging are plastic processing (or the pressure of the processing), collectively known as forging. Stamping the billet is hot-rolled and cold-rolled steel plate and steel strip.
 Feed roller through the two to achieve the friction of the sheet sent. Two roll axis by the distance between the ends of the driven roller adjusting set screws.
 Into a new sheet before release at the two ends of the driven roller set screws, and then transfer the distance between the two rollers, and into the sheet metal. After the sheet metal screw into the screw tightly scheduled so that the two pressed sheet metal roller.
 Pressed sheet metal, the feed device can be driven pulley in the press under the automatic feed. Pulley driven punch rack moved up and down (eccentric structure), red head down when pulley driven rack, rack through the gear shaft by a one-way clutch power transmission shaft to drive shaft rotation and then the helical gear shaft driven feed rollers feed first.
 Barrel roll on one end of the stent is fixed, the other end of the stent can be moved along the rail. Contains guide roller, frame and contact roller, roller rolling through the bracket to achieve the translation. Positioning of the side rails are screws, stents can be fixed at a suitable position.


Keywords: automatic feeding Stamping Die Design

目录
摘   要 i
Abstract ii
目录 iii
第1章  绪  论 1
1.1  冲压自动送料及冲压模具的概况 1
1.2  设计冲压自动送料需考虑的问题 2
第二章 冲压工艺介绍 3
2.1 冲压工艺的概述 3
2.1冲压工艺的种类 3
2.2 发展遇阻冲压成形业寻求突破 4
第三章  送料机构的分类 6
3.1卡钩式自动送料机构 6
3.2 微动开关控制的自动送料机构 6
3.3 辊轴式自动送料机构 7
第四章 选择压力机 9
4.1 压力机类型的选择 9
4.2 压力机规格的确定 10
第五章   辊轴式自动送料机构设计 11
5.1 送料辊轴直径的确定 11
5.2 传动设计 12
5.2送料机构设计 14
5.3 设计支架 14
第六章 冲压模设计 15
6.1 排版计算 15
6.2计算冲压力 15
6.3模具压力中心的确定 16
6.4计算凸凹模刃口尺寸 17
6.5凹凸模结构设计 18
6.6 模具总体设计及部分零件设计 18
第七章 压力机的安全防护 20
7.1 防护罩 20
7.2 滑块行程指示 20
7.3 转向指示 20
7.4 平衡检查 20
7.5 滑块行程缓冲装置 20
7.6 空气与液体压力 20
7.7 制动器制动功能 20
7.8 制动器制动力 21
7.9  安全栓 21
7.10 超载保护装置 21
7.11 一般要求 21
7.12 工作规范与调整规范的联锁 21
7.13 双手操纵 21
7.14 使用说明书 21
总结 23
致谢 25


压力机自动送料及冲压模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:扬声器面板注塑模具设计 下一篇:玩具卡车活塞的模具设计
推荐论文 本专业最新论文

点击查看关于 压力机 自动 送料 冲压模 设计 的相关论文题目 2011-03-27 13:34:52【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有