机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 电动助力转向系统控制策略的研究

电动助力转向系统控制策略的研究

本文ID:LW17107 字数:12979.页数:31

下载地址 全文下载链接(充值:158元) 如何充值?

电动助力转向系统控制策略的研究

论文编号:JX855  论文字数:12979.页数:31   附CAD图

电动助力转向系统控制策略的研究CAD图.png

摘    要

 汽车电动助力转向系统是一种新型的汽车转向系统,与传统液压转向系统相比,采用电动机直接提供助力,具有多方面优越性。它能够在各种行驶条件下提供最佳的助力,节省燃油,利于环保。近年来已有许多中高档汽车配备了电动助力转向系统装置,EPS研究也成为汽车工业的热门课题之一,具有重要研究价值和巨大潜在应用前景。
 本毕业设计是在山东中通客车控股有限公司进行的。主要设计资料及进行的实验都是在中通公司完成的。首先介绍了汽车电动助力转向系统的总体布置和工作原理,并对电动助力转向系统的主要部件做了详细分析;其次介绍了电动主力控制电路的设计;在电动助力转向系统的相关控制策中着重介绍研究回正与主动阻尼控制策略,通过研究,计算证明:该控制策略能够改善车辆低速时的回正性,抑制车辆中高速时的回正超调现象,并且在施加了回正与主动阻尼控制后,驾驶员的操纵手感没有受到不良的影响。
 
 关键词:电动助力转向  控制策略  助力电机   回正阻尼  中通公司

Electric Power Steering System Design
ABSTRACT
 Automotive electric power steering system is a new type of car steering systems, and compared to traditional hydraulic steering system using electric motors to provide power directly, with many advantages. It can in a variety of driving conditions to provide the best possible help to save fuel, environmentally friendly. In recent years, many in high-end car is equipped with electric power steering system device, EPS studies have become a hot topic in the automotive industry, has important research value and great potential applications.     First introduced the design of automotive electric power steering system of the overall layout and working principle of the electric power steering system has done a detailed analysis of components; Then, we introduce the design of electrical main control circuit;In the electric power steering system with the control strategy is highlighted in the study back to working with active damping control strategy,through research, calculations prove slightly,the control strategy can improve the speed of vehicles back positive,inhibition of return when the vehicle speed is overshoot;And in imposing the back after working with active damping control, the driver's control handle has not been adversely affected.
    Key words :Electric Power Steering  Control strategy  Power Motor         Come back to the damping     Zhongtong Bus Holdings Limited
 

 

目  录
摘     要 Ⅰ
ABSTRACT Ⅱ
第一章  绪论 6
 1.1  研究动机与目的 6
 1.2  研究背景 6
 1.3  研究方法与描述 7
 1.4  论文内容概述 7
第二章  电动助力转向系统总成部件及工作原理 8
 2.1  电动助力转向系统主要组成部件 8
     2.1 .1  助力电机 8
     2.1 .2 离合器 10
     2.1 .3减速传动机构 10
     2.1 .4扭矩传感器 11
     2.1 .5车速传感器 12
     2.1 .6电子控制单元 13
    2.2  EPS的工作原理 13
第三章  电动助力转向系统的控制电路设计 16
 3.1  电源转换电路 16
 3.2  微控制电路 17
 3.2.1  转矩信号采集电路 17
 3.2.2  电动机电流信号采集电路 17
 3.2.3  车速信号采集电路 17
 3.3  安全与故障诊断电路 18
第四章  电动助力转向系统控制策略 19
 4.1  EPS 系统控制模式 19
 4.1.1  助力控制 19
 4.1.2  回正控制 19
 4.1.3  阻尼控制 20
4.2  电动助力转向系统的回正与主动阻尼控制策略研究 20
4.3  实车实验 23
第五章  结论 26
致  谢 27
参考文献 28
附件A


电动助力转向系统控制策略的研究......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:活塞外形测量机设计——测量部分 下一篇:并联六自由度运动平台机构动力学..
推荐论文 本专业最新论文

点击查看关于 电动 助力 转向系统 控制 策略 研究 的相关论文题目 2011-04-02 15:37:00【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有