机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 拉拔减径机的改造

拉拔减径机的改造

本文ID:LW18364 字数:13170.页数:30

下载地址 全文下载链接(充值:168元) 如何充值?

拉拔减径机的改造

论文编号:JX963  论文字数:13170.页数:30   附CAD图

拉拔减径机的改造所有文件.png

摘     要

 本设计是应浙江康盛股份有限公司的生产需要,为了满足实现大口径无缝钢管的拉拔减径工艺要求,根据公司实际生产条件及在现有拉拔减径机的基础上,提出了一个拉拔减径机的改造设计方案。在本篇设计中,改变了以往设计人员完成凭借经验的设计方法,对重要零部件及重要电机的设计选择提出了理论依据。其中,在对拉拔过程中力的控制方面,根据空拉管材的力学性能要求,进行了一些必要的计算;在冷却润滑系统中也做了重大改进,取得较好的效果。同时,根据客户对产品提出的技术参数指标,进行了一些重要结构和零部件的设计计算。在设计完成后,进行了整机制造装配,对整机进行了性能测试,满足了浙江康盛股份有限公司提出的工艺要求,达到预定设计目标。
 关键词:拉拔;减径;设备改造
The Design and Implementation of Switch-based IPv6 Router
 
Abstract
 This design is based on the need of KaSun Co., Ltd. of Zhejiang, in order to achieve large-diameter seamless steel pipe to meet the requirements of drawing-reducing technology, according to the actual production conditions and reducing the existing Drawing on the basis of the proposed Drawing by a trail of the transformation of design options. In this design, changed the design to complete their previous experience with the design of the important components and an important motor of the design options put forward a theoretical basis. Among them, in the process of drawing the control, according to pull air pipe mechanical performance requirements, a number of the necessary calculations in the cooling lubrication system has also done a significant improvement, achieved good results. At the same time, according to the customer on the products of the technical parameters of indicators, a number of important parts of the structure and design calculations. Upon completion of the design, manufacture a the whole machine assembly, the whole machine a performance test to meet the Zhejiang KaSun Co., Ltd. put the technological requirements, scheduled to meet design objectives.
 Keywords:Drawing;Reduce the diameter;Equipment remodeling
 
目  录
摘   要 i
Abstract ii
第一章 绪论 1
1.1 课题背景 1
1.2 研究意义 1
1.3 文献综述 1
1.3.1 拉拔技术的发展史 1
1.3.2 拉拔分类 2
1.3.3 拉拔法的优、缺点 2
1.3.4拉拔技术发展趋向 3
1.3.5拉拔机的介绍 3
1.4 技术要求 4
1.5 本章小结 4
第二章 方案设计 5
2.1 总体方案设计 5
2.2 冷却润滑系统的方案设计 5
2.2.1冷却润滑油的选择 5
2.2.2 冷却润滑循环系统的介绍 6
2.3 收卷装置的方案设计 7
2.4 总体方案描述 8
第三章 空拉技术介绍 9
3.1 空拉时的应力分布 9
3.2 空拉时变形区内的变形特点 9
3.3 影响空拉时壁厚变化的因素 10
3.4 空拉对纠正管子偏心的作用 11
3.5 本章小结 11
第四章 主要设计计算说明 12
4.1 电机选择 12
4.2 传动带的设计计算 16
4.3 收卷轴的设计计算 17
4.4 拉模的设计计算 18
4.5 本章小结 20
结论 21
参考文献 22
毕业设计总结 23
致  谢 24


拉拔减径机的改造......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:水域垃圾清理船设计和制作 下一篇:胶带涂布机的张力控制模块
推荐论文 本专业最新论文

点击查看关于 拉拔 改造 的相关论文题目 2011-04-10 17:54:22【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有