机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 充电器盖板的注塑模设计

充电器盖板的注塑模设计

本文ID:LW18367 字数:21887.页数:64

下载地址 全文下载链接(充值:168元) 如何充值?

充电器盖板的注塑模设计

论文编号:JX966  论文字数:21887.页数:64  附CAD图

充电器盖板的注塑模设计CAD图.png

摘    要
    介绍了当今塑料模具工业发展的状况,分析了充电器盖板的结构工艺性,研究了模具的整体结构,首先应用Moldflow软件对塑件进行浇口位置和填充分析,然后应用UG软件设计模具的三维模型,最后应用Moldflow软件对塑件进行流动、冷却和翘曲分析。发现通过设计合理的侧向抽芯机构、浇注系统、推出机构,冷却系统和排气槽,可以有效的减少塑件上气穴、熔接痕、翘曲及凹陷等成型缺陷。结果表明,本文设计的模具结构较合理,可有效减少塑件的成型缺陷,得到高品质的塑件产品。
关键词:注塑模 充电器盖板 Moldflow UG NX

The Injection Mold Design of a Plastic Charger Cover
    
Abstract
    This article reports the current development situation of the plastic molds industry. Analyze the structural processability of charger's cover. Study the overall structure of the mold. First, apply Moldflow to analyze the gate location and filling of the parts. Second, apply UG NX to design the 3D model of the injection mold. Final, apply Moldflow to analyze the flow, cool and warp of parts. Discover that through rational design of side core pulling, runner system, ejection mechanisms, cooling System and vents, the mold can effectively reduce the molding defects of air traps, weld lines, wrap and sinking on the parts. The result shows that, the rational mould structure of this article designs can effectively reduce the molding defects, and obtain high-quality plastic products.
Key words: Injection Mold; Charger's Cover; Moldflow; UG NX


目  录
摘   要 i
Abstract ii
目  录 iii
第一章  绪论 1
 1.1  模具工业概述 1
 1.1.1  模具在材料加工工业中的重要地位 1
 1.1.2  国内外塑料模具技术现状及发展趋势 1
 1.2  主要软件简介 3
 1.2.1  UG NX 软件简介 3
 1.2.2  MoldFlow 软件简介 3
 1.2.3  AutoCAD 软件简介 4
 1.3  课题内容概述 5
第二章  模具总体设计 9
 2.1  塑件的结构工艺性分析 9
 2.2  模具结构方案的确定 11
 2.3  注塑机型号的初步确定 13
 2.4  塑件模型CAE预分析 15
 2.5  本章小结 20
第三章  基于UG软件的模具设计 21
 3.1  基于UG软件的设计和计算 21
 3.2  注塑机参数的校核 44
 3.3  本章小结 45
第四章  模具CAE总体分析 46
 4.1  分析前处理 46
 4.2  分析结果及相关后处理 48
 4.3  本章小结 56
结  论 57
参考文献 58
致  谢 59


充电器盖板的注塑模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:喇叭罩成型模设计 下一篇:SCD630槽板侧板成型模具设计
推荐论文 本专业最新论文

点击查看关于 充电器 注塑模 设计 的相关论文题目 2011-04-10 18:16:44【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有