机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 横轴式掘进机总体方案设计与液压系统设计

横轴式掘进机总体方案设计与液压系统设计

本文ID:LW19657 字数:16841.页数:49

下载地址 全文下载链接(充值:158元) 如何充值?

横轴式掘进机总体方案设计与液压系统设计

论文编号:JX1460  论文字数:16841.页数:49  附开题报告,实习报告,外文翻译,CAD图,CAXA图

横轴式掘进机总体方案设计与液压系统设计文件截图.png横轴式掘进机总体方案设计与液压系统设计总装图.png

摘   要
 掘进机在当今的社会生产中,无论是在矿物开采,还是在巷道的开掘都是有着重要的地位。
 EBZ-160型悬臂式掘进机,它是一种能够实现连续切割,装载,运输的掘进设备。其特点是截割头可以伸缩达到 500 mm ;有提高机器稳定性的后支撑装置;刮板运输机和铲板部均采用低速大扭矩液压马达直接驱动,减少故障环节;行走部采用液压马达驱动;履带采用油缸张紧装置;刮板链的涨紧均采用弹簧与油缸组合的涨紧装置;截割电机为水冷电机,有热敏保护;在液压系统为液压锚杆钻机留有液压接口。该机截割效率高,机器稳定性好,操作与维护方便,运行安全可靠。
 本论文主要对掘进机的整机部件,总体结构,液压系统,进行了具体的说明、分析、计算、设计和校核;其中对液压系统进行了详细的设计。
关键词:掘进机;横轴式;总体设计;液压系统

 

Abstract
 Boring machine in the contemporary social production, both in mineral exploration, exploitation or in the roadway are important position.
 EBZ-160-cantilevered boring machine, it is to achieve a continuous cutting, loading, transport of tunneling equipment. Its characteristics are cutting head can be extendable to 500 mm; enhance the stability of the machine after the Support Unit; scraper and shovel board of the transport planes are used large low-speed torque direct drive hydraulic motors, reducing fault links run by the Department of Pressure motor-driven; tracked by the fuel tank of tensioning devices; scraper chain rose bear in spring and fuel tanks are used up tight combination of devices; cutting the electrical motors for water-cooled, thermal protection in the hydraulic system for hydraulic Roofbolter have a hydraulic interface. Cutting efficient aircraft, machinery good stability, operation and maintenance of convenient, safe and reliable operation.
 The present paper mainly to mechanical boring machine's complete machine part, the gross structure, the hydraulic system, has carried on the concrete explanation, the analysis, the computation, the design and the examination; And has carried on the detailed design to the hydraulic system.

目   录
1 EBH200概述 1
1.1 装载部 1
1.2 刮板输送机 1
1.3 机架和回转台 2
1.4 行走部 2
1.5 液压系统 2
1.6 油缸回路 2
1.7 行走回路 3
1.8 装载回路 3
1.9 运输、紧链、锚杆回路 3
1.10 内、外喷雾冷却系统 4
2 主要技术参数 5
2.1 整机参数 5
2.2 电气部分 7
3 横轴式掘进机工作机构得运动学和动力学参数计算 10
3.1 横轴式掘进机的工作机构运动学参数计算 10
3.2 横轴式掘进机工作机构的截割参数与动力学参数计算 11
4 横轴式掘进机工作机构设计 14
4.1 工作机构设计 14
5 工作机构传动设计 16
5.1 工作机构传动的特点及动力组件的选择 16
5.2 减速设计应注意的问题 17
6 悬臂支撑设计 19
6.1 回转装置 19
6.2 回转装置的布置形式 22
7 总体设计 23
7.1 总体结构方案设计 23
7.2 总体布置的内容 23
7.3 总体参数的确定 25
7.4 生产率 27
8 掘进机的稳定性分析于计算 31
8.1 静态稳定性 31
8.2 截割时的静态稳定性计算 32
8.3 动态稳定性 34
9 液压系统设计 35
9.1 设计依据 35
9.2 工况分析及载荷计算 36
9.3 拟定液压系统 36
9.4 液压系统设计 44
致  谢 48
参考文献 49


横轴式掘进机总体方案设计与液压系统设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:掘锚联合机组整体方案设计 下一篇:纵轴式掘进机总体方案设计及其装..
推荐论文 本专业最新论文

点击查看关于 掘进机 总体 方案设计 液压 系统 设计 的相关论文题目 2011-05-11 08:29:43【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有