机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 纵轴式掘进机总体方案设计与液压系统设计

纵轴式掘进机总体方案设计与液压系统设计

本文ID:LW19660 字数:28055.页数:81

下载地址 全文下载链接(充值:158元) 如何充值?

纵轴式掘进机总体方案设计与液压系统设计

论文编号:JX1463  论文字数:28055.页数:81 附开题报告,实习报告,外文翻译,CAD图,CAXA图

纵轴式掘进机总体方案设计与液压系统设计文件截图.png纵轴式掘进机总体方案设计与液压系统设计总装图.png

摘要
 
 掘进机是煤炭生产和建设的基础工程,在煤炭工业中具有基础性的关键地位。本设计力图结合行业标准和设计规范,根据工作要求和设计目的进行掘进机总体方案设计与液压系统设计,确定符合要求的掘进机的总体参数。
 在液压系统设计部分,基本上确定各零部件的液压使用原理及参数计算。这里分析计算了截割部、行走机构、装运机构、中间运输机等载荷分析。马达部分的确定:装载部的星轮机构马达、行走机构的驱动马达、中间运输机的驱动马达等。油缸部分的确定:升降油缸、回转油缸、伸缩油缸、履带行走机构的张紧油缸、铲板部的升举油缸的计算设计。
 液压缸的结构设计部分,进行了伸缩油缸的机构设计计算,并绘制零件图。也进行了泵站的参数计算确定和液压系统的计算,评估液压系统性能。
 最后进行掘进机的通过性分析与稳定性分析。
关键词:掘进机;总体方案设计;液压系统
 
 
Abstract
 
 Roadheader is the foundation of the Coal Industry. In the coal industry, Roadheader is in the key foundation status. This paper attempts to combine industry standards and design specifications, in accordance with the requirements and design of general purpose, make general design of longitudinal roadheader and design of hydraulic system, determined to meet the requirements of the overall tunneling machine parameters.
 In the design of the hydraulic system, this paper basically establishes the principle of the use of hydraulic components and parameters. Here analysis of the cutting unit, operating agencies, shipping agencies, transport planes, and other intermediate load analysis. The set of Motor part include: the motor of star ferry carrying, the drive motor running, the middle of the drive motor and other transport planes. Part of the fuel tanks identified: the fuel tank movements, rotary fuel tank, the fuel tank of stretching, walking track the take-up fuel tanks, shovel board or give the Department of the calculation of the fuel tank design.    Cylinder part of the structural design, the paper discusses a telescopic design of the fuel tank of the bodies, parts and drawing plans. Also had a pumping station and determine the parameters of the hydraulic system, hydraulic system performance assessment.     Finally, roadheader through analysis and stability analysis is discussed.
Key words: roadheader; Overall concept design; hydraulic system

目录
前言 1
1 设计要求及目的 3
2 总体方案设计 4
2.1 机型的选定及主要部件的结构形式的确定 4
2.1.1 机型的选定 4
2.1.2 各部件的结构型式的确定 5
2.2 总体参数确定 9
2.2.1 机器外形尺寸 9
2.2.2 重量估算 10
2.2.3 机器可掘断面 10
2.2.4 截割机构技术参数的初步确定 12
2.2.5 装运机构参数确定 17
2.2.6 行走履带技术参数的确定与连接 17
2.2.7 喷雾系统的参数 20
2.2.8 生产率 20
2.3 掘进机的传动系统 24
2.4 总体布置图 25
2.5 总体参数总结 26
3 液压系统设计 27
3.1 基本要求 27
3.2 工况分析及载荷计算公式 27
3.3切割部的工况分析、工作负载计算 28
3.4 拟定液压系统 29
3.4.1 初选系统压力 30
3.4.2 拟定主回路 30
3.4.3 各机构液压回路的设计 34
3.5 液压系统图 37
3.6 各液压系统的执行元件设计 38
3.7 伸缩液压缸的结构设计 59
3.8 液压系统参数计算 65
3.9 液压系统各元件汇总 72
4 掘进机的通过性与稳定性分析 73
4.1 掘进机的通过性 73
4.2 掘进机的稳定性分析与计算 73
5 结语 78
致谢 79
参考文献 80


纵轴式掘进机总体方案设计与液压系统设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:横轴式掘进机总体方案设计与液压.. 下一篇:刨煤机传动系统与急停缓冲装置设计
推荐论文 本专业最新论文

点击查看关于 掘进机 总体 方案设计 液压 系统 设计 的相关论文题目 2011-05-11 08:38:20【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有