机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 车载电池防水保护系统设计

车载电池防水保护系统设计

本文ID:LW20556 字数:22081.页数:42

下载地址 全文下载链接(充值:128元) 如何充值?

车载电池防水保护系统设计

论文编号:JX1510  论文字数:22081.页数:42

车载电池防水保护系统设计
摘  要

    随着汽车电子技术的飞速发展,车辆上的电控系统的数量不断的增多,而且功能也越来越复杂。很多汽车采用了一个或多个电脑控制系统,每一个电脑需要与多个传感器、执行器之间发生通讯。为了保证整个汽车整个电控系统正常工作,汽车每个电子元件需要一个相对稳定的工作环境,尤其要防止电器元件出现短路,因为电子元件之间的短路,可能产生瞬时的高电流,这样就容易使电控系统中某个模块或者整个系统瘫痪,而这些故障又存在着不确定性。汽车整个电控系统将无法正常工作,不能发挥出必要的优势,整车的主动安全性能和被动安全性能也将大大降低。
    为了能够使整个汽车电子系统有一个稳定安全的电控系统,并能承受恶劣环境下的考验。尤其是在汽车涉水,或者被水淹的情况下,需要一个防水保护系统,以保护车载电器设备不会在电源短路时造成伤害。本毕业设计立足于现实,目的就是为了通过自己的研究与设计,解决一些生活中的问题。

关键字: 电控系统  防水  电池  ECU 

Vehicle battery waterproof protection system design
Abstract

    With the rapid development of auto electronic technology, vehicle electronic control system on the ever-increasing numbers, and the function is more complex. Many cars with one or more computer-controlled system, each computer needs and more communication between sensors, actuators. In order to ensure that the entire automotive electronic control system as a whole work, car of each electronic component needs a relatively stable environment, in particular, to prevent short circuit electrical components, because the short circuit between electronic components, may produce instantaneous high current, so easy to make a module or in the electric control system of the entire system crashes, and these failures and there is uncertainty. Automotive electronic control system as a whole will not work properly, you cannot take advantage of the necessary, active safety and passive safety of the vehicle can also be greatly reduced.
    In order to make the entire auto electric control system of the electronic system has a stable and secure, and can withstand the harsh environment of the test. Especially in the automobile wading, or been flooded case, you need a waterproof protection system to protect car electrical equipment does not damage when power is short circuit. The graduation design based on reality, purpose is to adopt its own research and design, solve some problems in life.

Keywords: Electric Control Unit    Waterproof   Battery   Insurance Kit  

目录

摘  要 I
Abstract II
1  汽车防水系统概述 1
1.1汽车防水系统研究的背景 1
1.2研究汽车防水系统的必要性 3
1.2.1车辆被水淹多有后遗症 3
1.2.2蓄电池水中短路 3
1.2.3传感器 3
1.3防水系统通用性原则 4
1.4防水系统的优点与不足 4
2  汽车防水系统研发的可行性 6
2.1工作稳定 6
2.2系统精巧 6
2.3成本低廉 7
2.4方便安装 7
3  汽车防水系统的实用性 8
3.1防水系统能够解决的问题 8
3.2提供稳定安全的供电系统 8
3.3延长车载电器设备使用寿命 8
3.4研究分析 8
3.4.1 基本思路 8
3.4.2技术路线 8
3.4.3 设计方案 9
4  汽车防水系统分析 10
4.1防水系统分类 10
4.2电池防水系统原理简介 10
4.2.1电池系统简介 10
4.2.2ECU电控系统简介 12
4.2.3保险盒简介 12
4.2.4传感器接口系统简介 13
4.2.5其他防水系统简介 14
4.3防水系统结构分析 16
4.3.1电池防水设计 16
4.3.2 ECU防水系统研究 17
4.3.3保险盒防水设计 17
4.3.4传感器接口系统的防水设计研究 17
4.3.5其他防水系统的补充设计研究 17
4.3.6技术分析 18
4.4密封圈的类别 22
4.4.1 O型密封圈系列 22
4.4.2 Y型密封圈 22
4.4.3硅橡胶系列 22
4.4.4氟橡胶系列产品 22
4.4.5聚四氟乙烯系列产品 22
4.4.6各种异形杂件 22
5  汽车防水系统设计 23
5.1防水系统电路图设计与分析 23
5.2电池防水系统结构设计与分析 23
5.3电池防水系统结构验证与分析 26
5.4电池防水系统结构实物演示 28
6  汽车防水系统总结 29
6.1各部件的防水评测 29
6.2整体的防水性总结 30
结  论 31
参考文献 32
附  录 33
致  谢 37


车载电池防水保护系统设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:轿车自动挡变速器设计 下一篇:车用双轴输出式电动机设计与仿真
推荐论文 本专业最新论文

点击查看关于 车载 电池 防水 保护 系统 设计 的相关论文题目 2011-07-15 10:38:31【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有