机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> DL-4 单螺旋锥形混合机设计

DL-4 单螺旋锥形混合机设计

本文ID:LW22050 字数:12133.页数:34

下载地址 全文下载链接(充值:168元) 如何充值?

DL-4 单螺旋锥形混合机设计

论文编号:JX1534  论文字数:12133.页数:34  附任务书,开题报告,外文翻译,CAD图,答辩PPT

DL-4 单螺旋锥形混合机设计文件截图.png

DL-4 单螺旋锥形混合机设计
 【摘要】混合机是一种高效的混合设备,适用于化工、医药、石油、建材等。可以用于粉体与粉体,粉体与液体,液体与液体混合。因此,混合机在当代应用非常广泛。DL-4单螺旋锥形混合机的混合效果比传统的滚筒式提高功效10多倍,具有混合速度快、混合精度高、动力消耗低、装载系数大、运转平稳可靠以及操作条件良好、清洗维修方便、使用寿命长等优点。它特别适用于比重悬殊,颗粒大小不一的物料混合。其特征是它只有一个搅拌螺旋,该搅拌螺旋所在的轴的底端从内轴承座上外伸且能够带动它自转的下减速器的输出轴连接;且能够带动搅拌螺旋公转的转臂上;内轴承座安装在机壳底部的能允许其作为搅拌螺旋所在轴的公转支撑点的外轴承座内,从而解决了现有的单螺旋锥形混合机得结构复杂耗能大且使用中物料有受润滑油污染的危险等问题,DL-4单螺旋锥形混合机的主要部件有减速器、圆柱齿轮传动、锥齿轮传动、轴承座、搅拌螺旋。本设计的内容主要包括传动方案的设计,齿轮传动的相关计算,电动机及减速器的选择,并利用了相关的制图软件进行了零件的设计和处理。
 【关键词】单螺旋锥形;搅拌螺旋;传动


DL-4 single-screw conical mixer design

  [Abstract] Mixer is a highly efficient mixing equipment for chemical, pharmaceutical, oil and building materials. Can be used in powder and the powder and liquid, liquid and liquid mixture. Therefore, the mixer is widely used in contemporary. DL-4 single-screw conical mixer for mixing than the traditional roller to improve the effectiveness of 10 times, with mixed speed, mixing high precision, low power consumption, loading coefficient, smooth and reliable operation and good operating conditions, cleaning and maintenance convenience and long life. It is particularly suitable proportion of the poor, mixed particle sizes of materials. The feature is that it is only a mixing screw, the mixing screw is located at the bottom of the shaft within the bearing housing from the extended and they can bring it to the next rotation of the output shaft gear; and can bring the mixing spiral arm of the revolution of the transfer; bearing installed in the chassis in the bottom of the mixing screw to allow it as a revolution where the shaft bearing in the outer support points, so as to solve the existing single-screw conical mixer too big and complex structure of energy consumption and material use are risk of contamination by oil and other issues, DL-4 single-screw conical mixer's main components are gear, cylindrical gear drive, bevel gear, bearing, stirring spiral. The design mainly includes design of transmission scheme, the relevant calculation of gear drive, motor and reducer selection, and use the related graphics software design and processing of parts.
 [KeyWords] single spiral bevel; gear tapered mixing; screw drive bearing


目  录

毕业设计(论文)任务书 Ⅰ
开题报告 Ⅱ
指导教师审查意见 Ⅲ
评阅老师评语 Ⅳ
答辩会议记录 Ⅴ
中文摘要 Ⅵ
外文摘要 Ⅶ
前言 Ⅷ
1 绪论 1
2 选题背景 3
 2.1题目来源及研究意义 3
 2.2 研究中的问题 3
 2.3 混合机的现状与发展 3
3 单螺旋混合机方案的确定 8
 3.1 整体结构的方案 8
 3.2 传动方案的确定 8
4 单螺旋混合机基本参数的计算及电动机的选择 9
 4.1 单螺旋锥形混合机基本参数的计算 9
 4.2 电动机及减速机选择 11
5 单螺旋锥形混合机传动机构的设计 13
 5.1 直齿圆柱齿轮传动的计算 13
 5.2 轴交角为90的锥齿轮设计计算 17
 5.3 轴交角为75的锥齿轮设计计算 21
 5.4 按齿根弯曲强度设计 22
6 轴承及轴承座选取 26
 6.1 轴承的选取 26
 6.2 轴承的安装方法 26
 6.3 轴承的预紧 27
7 总结 28
参考文献 29
致谢 30


DL-4 单螺旋锥形混合机设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:EQ五吨货车三轴式五档变速器设计 下一篇:CA6140车床后托架加工工艺及夹具..
推荐论文 本专业最新论文

点击查看关于 DL-4 螺旋 混合机 设计 的相关论文题目 2011-10-15 13:37:00【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有