机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 座椅支架冲压工艺分析及模具设计

座椅支架冲压工艺分析及模具设计

本文ID:LW24563 字数:14393.页数:32

下载地址 全文下载链接(充值:168元) 如何充值?

座椅支架冲压工艺分析及模具设计

论文编号:JX1576  论文字数:14393.页数:32 附任务书,开题报告,外文翻译,CAD图

座椅支架冲压工艺分析及模具设计.png

座椅支架冲压工艺分析及其模具设计
摘要:本设计课题给定的是某摩托车座椅支架,形状简单,同时包括冲裁和弯曲两道工序,其中弯曲相对比较简单。在本次设计中关键的地方是合理的选择模具间隙,在模具的设计中间隙直接影响着冲裁件的质量,所以合适的间隙的选择应以工件断面质量、冲裁件精度、模具寿命和加工质量四项为依据,并且进行适当的分类。在模具设计部分重点在于凸、凹模的设计,它们都要先进行试模合格以后再热处理,因为它影响着冲裁件是否合格。
由于本零件属于大批量生产,而且制作精度要求不高,需要多工序冲成的小型零件。所以冲裁我选择了级进模,以便能满足制造要求的同时也增加了操作的安全性及减少模具和设备的数量,从而减少车间的占地面积。
由于本人水平有限,本论文中必然存在不少纰漏及错误之处,敬请评阅老师批评指正。


关键词:冲裁间隙  级进模  段面质量  模具寿命
                                          
Chair support ramming craft analysis and its mold design
Abstract: This design topic assigns is some motorcycle chair support, the shapeis simple,
Simultaneously includes falls the material and the curving two workingprocedures, curving relative quite is simple. In this design the essential place is the reasonable choice mold gap,the gap directly affects in the mold design is falling the materialquality, therefore the appropriate gap choice should take the workpiece cross section quality, fall the material precision, the moldlife and the processing quality four items as the basis, and carrieson the suitable classification. Partial key raised lies in, theconcave mold design in the mold design, they all will want theadvanced line of examination mold qualified later in the heattreatment, because it will affect is falling the material will bewhether qualified.
Because this components belong to the mass production, moreover themanufacture precision request is not high, needs the small componentswhich the multi- working procedures flushes. Therefore the cut die hadme to choose the level to enter the mold, in order to could satisfythe manufacture request at the same time also to increase theoperation security and the reduced mold and the equipment quantity,thus reduced the workshop the area. Because myself level is limited, in the present paper inevitably hasmany careless mistakes and the mistake place, asks respectfully tocomment reads teacher to criticize points out mistakes.
Keyword:chongcai gap      The level enters the mold   Section surface quality 
Mold life

目录
绪论
  1.1 选材的依据及课题的意义…………………………………………………(1)
  1.2 模具行业现状及发展趋势…………………………………………………(1)
  1.3 内容几实验方案……………………………………………………………(2)
  1.4 主要特色几工作进度………………………………………………………(2)
第二章 工艺方案分析………………………………………………………(3)
  2.1 零件的工艺性分析…………………………………………………………(3)
  2.2 加工工艺方案的确定………………………………………………………(4)
第三章  冲裁模设计……………………………………………………… (4)
  3.1 毛胚尺寸计算及工艺分析…………………………………………………(4)
  3.1.1 毛胚尺寸计算…………………………………………………………… (4)
  3.1.2 冲裁工艺分析…………………………………………………………… (5)
  3.2 工件排样与搭边……………………………………………………………(6)
  3.2.1排样……………………………………………………………………… (6)
  3.2.2 搭边……………………………………………………………………… (8)
  3.3 冲裁间隙……………………………………………………………………(9)
  3.4 冲裁力的预算………………………………………………………………(9)
  3.5 模具压力中心的计算…………………………………………………… (11)
  3.6 凸凹模刃口尺寸的计算………………………………………………… (12)
  3.7 模具的总体设计………………………………………………………… (17)
  3.7.1 冲模的闭合高度…………………………………………………………(17)
3.8 机构件与标准件的选用………………………………………………… (17)
3.8.1 模架…………………………………………………………………… (17)
3.8.2 模座…………………………………………………………………… (18)
3.8.3 模柄…………………………………………………………………… (18)
3.8.3定位装置…………………………………………………………………(18)
3.9 冲模设备选择…………………………………………………………… (18)
3.9.1 冲裁设备类型的选择………………………………………………… (18)
3.9.2 压力机选用原则……………………………………………………… (19)
弯曲模设计………………………………………………………(20)
  4.1 分析零件的冲压性………………………………………………………(20)
  4.2  弯曲回弹…………………………………………………………………(22)
  4.2.1 影响回弹量的因素………………………………………………………(22)
  4.2.2 减少回弹量的措施………………………………………………………(23)
  4.3 进行弯曲力的计算……………………………………………………… (24)
  4.4 估算模具的各部分尺寸 初步选择压力机和模架………………………(25)
  4.5 主要部件的初步设计及选用…………………………………………… (26)
  4.6 模架 导柱 导套及模柄的选用………………………………………… (27)
 4.7 压力机的选用………………………………………………………………(27)
 4.8 标准件的选用………………………………………………………………(27)
参考文献……………………………………………………………………… (30)
致谢………………………………………………………………………………(31)
附录A……………………………………………………………………………(32)


座椅支架冲压工艺分析及模具设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:汽车锁座零件冲压工艺分析及模具.. 下一篇:骨架模具的设计与制造
推荐论文 本专业最新论文

点击查看关于 座椅 支架 冲压 工艺 分析 模具设计 的相关论文题目 2012-04-14 18:00:04【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有