机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 酸奶桶的反求造型研究

酸奶桶的反求造型研究

本文ID:LW24634 字数:18249.页数:41

下载地址 全文下载链接(充值:128元) 如何充值?

酸奶桶的反求造型研究

论文编号:JX1642  论文字数:18249.页数:41 附开题报告,外文翻译

酸奶桶的反求造型研究

摘 要:本文提出如何利用UG和surfacer软件进行模具逆向设计的问题,这一问题的提出基于以下原因:
 1.在三坐标测量机上能够快速精确的测量到大量的已有产品的表面坐标值。
 2.在专用的点处理软件surfacer上能够较精确的将测的的点拟合成曲线和曲面。
 3.在UG软件上能够复原产品实体,以及进一步反求模具的逆向设计和制造一体化。
 点云数据预处理和曲线曲面重构是逆向工程模具设计中的关键技术,虽然UG软件具有强大的曲线曲面造型功能,但是点云数据预处理的功能相当薄弱。为此本文以surfacer作为中间软件,完成点云数据的预处理,提高了在UG软件上进行逆向工程的效率和精度。
 本文主要研究的工作如下:
 1.探讨三坐标测量的多种方法和目前国内外的发展现状。
 2.点云排序方法的研究,初步建立点云之间的拓扑关系,使点云具有一定的完整性,并去除噪声点。
 3.利用surfacer开发工具完成点云排序与精简和点云曲线曲面拟合,并实现了拟合曲面在UG界面上的显示。
 4.以UG的曲面处理和实体建模作为工具软件复原实体和反求模具。
 
关键词:逆向工程, 点云处理, surfacer
 


 Reverse yougurt shape of a barrel
ABSTRACT:  This paper presents how to use UG and surfacer software on the reversing design of the mold problem, the issue raised for the following reasons:      1. In the CMM we can be able to quickly and accurately measuring a large number of products already on the surface coordinates.      2. Points in a dedicated software surfacer can be easily handled more accurate will be adjacent to the point of curves and surfaces.      3. UG software products to be able to recover entities, and to further reverse the reverse die design and manufacturing integration.
 Point cloud data and pretreatment of surface reconstruction is the reverse engineering of key technologies, while UG software has powerful features of surface modeling, but the point cloud data pre-processing functions quite weak. Surfacer to this paper as an intermediary software, the completion point cloud data preprocessing, the increase in the UG reverse engineering software on the efficiency and accuracy. This paper on the work are as follows:      1.The CMM on a variety of methods and the development of the status at home and abroad.      2.Point cloud sort of way, the initial establishment of point cloud relations between the topology, to a certain point cloud the integrity and remove noise points.      3.Surfacer use development tools to sort and the completion point-to streamline and point-fitting curves and surfaces, and to achieve a fitting surface interface displayed on the UG.      4.UG to the surface processing and modeling software as a tool for physical rehabilitation and reverse model.
KEY WORDS: Reverse engineering, Point cloud processing, Surface         

目 录

摘 要 (I)
ABSTRACT (II)
目 录 (1)
前 言 (1)
1 绪论 (3)
 1.1 逆向工程概述 (3)
 1.2 逆向工程及模具设计的发展现状 (6)
 1.3 本文研究的内容和意义 (8)
 1.3.1 研究内容 (8)
 1.3.2 研究意义 (8)
2 产品表面坐标的测量 (9)
 2.1 测量方法分析 (9)
 2.1.1 接触式测量 (10)
 2.1.2 非接触式测量 (10)
 2.2 测量设备的发展 (10)
 2.2.1 坐标测量机的最新发展 (11)
 2.3 ATOS扫描仪数据点测量原理 (11)
 2.4 点云数据的获取 (11)
3 点数据的预处理 (12)
 3.1 surfacer软件介绍 (12)
 3.2 点云数据预处理[1] (13)
 3.2.1 数据平滑 (13)
 3.2.2 数据过滤 (13)
 3.2.3 数据分块和数据融合 (13)
 3.2.4 数据优化 (14)
 3.2.5 点云拼合 (14)
 3.3 曲线重构的原理 (14)
 3.4 曲面重构的原理 (15)
4 Surfacer软件重构曲面[2] (17)
 4.1 点云数据处理 (17)
 4.1.1 数据点的导入 (17)
 4.1.2 噪声点处理 (18)
 4.2 曲线创建 (18)
 4.3 曲面创建 (20)
5 UG反求实体及模具 (21)
 5.1 UG软件简介 (21)
 5.2 UG复原实体设计过程 (21)
6 UG注塑模具设计 (29)
结  论 (36)
参考文献 (37)
致  谢 (38)


酸奶桶的反求造型研究......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:汽车轮毂盘的反求造型研究 下一篇:玩具汽车的逆向造型研究
推荐论文 本专业最新论文

点击查看关于 酸奶 造型 研究 的相关论文题目 2012-04-15 09:30:52【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有