机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 三坐标测量机的机械结构设计及应用

三坐标测量机的机械结构设计及应用

本文ID:LW24652 字数:20242.页数:35

下载地址 全文下载链接(充值:168元) 如何充值?

三坐标测量机的机械结构设计及应用

论文编号:JX1660  论文字数:20242.页数:35 附任务书,开题报告,外文翻译,CAD图

三坐标测量机的机械结构设计及应用.png

三坐标测量机的机械结构设计及应用
摘要:从60年代初发明到现在,三坐标测量机(CMM)在制造业得到世界范围广泛应用,成为3D检测工业标准设备。三坐标测量技术得到迅速发展,而配套检测软件的发展,更是突飞猛进。最早的三坐标测量机只能显示XYZ坐标,而目前的各种检测软件几乎可以解决用户的绝大部分问题。软件日益成为影响用户使用好坏的关键所在。CMM测量软件发展趋势,对于传统的三坐标测量机检测来说,通常是设计部门提供二维图纸,检验部门根据图纸对工件进行尺寸及形位公差的检测。随着三维CAD软件的应用,越来越多的技术部门使用三维CAD建模技术进行设计。因此,各坐标机厂家纷纷推出了基于三维CAD技术的测量软件,直接将客户设计好的三维CAD模型导入测量软件进行检测。这样做的优点非常明显,不需要额外的图纸,理论值可以直接捕获,更可以进行测量仿真,测头干涉检查等,所以,受到用户的一致好评。基于CAD的测量成为目前三坐标测量软件的发展热点。


关键词 三坐标测量机   传感器   三维     传动装置


Coordinate measuring machine mechanical design and application
Abstract:Invents from the beginning of the 60's to present, coordinate measuring machines (CMM) obtains the worldwide scale widespread application in the manufacturing industry, becomes the 3D examination industry standard equipment. Three coordinates survey technology obtains the rapid development, but the necessary examination software development, is progresses by leaps and bounds. The earliest coordinate measuring machines only can demonstrate the XYZ coordinates, but the present each kind of examination software may solve user's major part problem nearly. The software becomes the influence user use quality the key to be at day by day. The CMM survey software trend of development, regarding the traditional coordinate measuring machines examination, usually is designs the department to provide the two-dimensional blueprint, the inspection department carries on the size and the shape position common difference examination according to the blueprint to the work piece. Along with the three dimensional CAD software application, the more and more many technical department uses the three dimensional CAD modeling technology to carry on the design. Therefore, various coordinates machine factory has promoted in abundance based on the three dimensional CAD technology survey software, the three dimensional CAD model which designs the customer inducts directly surveys the software to carry on the examination. Does this the merit is extremely obvious, does not need the extra blueprint, the theoretical value may catch directly, may carry on the survey simulation, the gauge head interference inspection and so on, therefore, receives the user the consistent high praise. Survey the software based on the CAD survey into at present three coordinates the development hot spot.
Key words  Coordinate measuring machines   Sensor   Three dimensional      Transmission device

  
 
 
 目 录
 1  绪论 3
1.1 三坐标测量机的应用与发展 3
1.2 三坐标测量机测量原理 6
1.3 设计要求 8
 2  三坐标测量机总体设计方案 8
2.1 设计任务和内容 8
2.2 总体设计方案拟订 8
2.2.1 三坐标测量机机械部分设计 9
2.2.2  三坐标测量机电路部分设计 9
 3  三坐标测量进给系统的设计计算 16
3.1 进给系统电动机的容量的选择 16
3.1.1 电动机容量的选择原则 16
3.1.2 步进电动机的概述 16
3.1.3 步进电动机的容量的计算 17
3.2 轴概述 17
3.2.1 轴的用途 17
3.2.2 轴设计的主要内容 17
3.2.3 轴的材料 17
3.3 轴的结构设计 18
3.3.1 拟定轴上零件的装配方案 18
3.3.2 轴上零件的定位 18
3.3.3 轴的结构设计 19
3.3.4 初步设计轴的最小直径 20
3.3.5 拟定轴上零件的装配方案 21
3.3.6 根据轴向定位的要求确定轴的个段直径和长度 21
3.3.7 轴上零件的轴向定位 22
3.3.8 确定轴上圆角和倒角尺寸 22
3.4 丝杠螺母副的选用计算 22
3.4.1 丝杠螺母的导程的确定 22
3.4.2 确定丝杠的等效转速 22
3.4.3 丝杠的等效负载上边已经阐明过了 22
3.4.4 确定丝杠所受的最大动载荷 22
3.4.5 临界压缩负荷 22
3.4.6 临界转速验算 23
3.4.7 计算轴承动载荷 23
3.4.8 丝杠拉压振动和扭转振动的固有频率验算 24
3.5 丝杠的扭转刚度 24
3.6 传动精度计算 25
3.7 导轨的选型及计算 25
3.7.1 滚动导轨的结构及配置直 25
3.7.2 滚动导轨副的预紧 26
3.7.3 滚动导轨副润滑防护 26
3.8 横向伺服进给系统的设计计算(同以上方法) 26
3.9 纵向、横向的移动工作台的装配图见(图3-1) 26
论文总结 27
致谢 28
参考文献 29
附录 30


三坐标测量机的机械结构设计及应用......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:加速度过载模拟实验台设计 下一篇:YAH2460—圆振动筛设计
推荐论文 本专业最新论文

点击查看关于 坐标 测量机 机械 结构设计 应用 的相关论文题目 2012-04-15 14:15:27【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有