机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 轮组式楼宇助行器设计

轮组式楼宇助行器设计

本文ID:LW24934 字数:18316.页数:53

下载地址 全文下载链接(充值:168元) 如何充值?

轮组式楼宇助行器设计

论文编号:JX1665  论文字数:18316.页数:53 附任务书,开题报告,CAD图,外文翻译

轮组式楼宇助行器设计.png

摘  要
 楼梯是人造环境中最常见的障碍,也是移动机器人最难跨越的障碍之一,本设计主要研究爬楼机器人行走机构的结构设计。在深入分析爬楼机构及其攀爬对象的基础上,针对楼梯结构的变性,研制了具有爬楼梯强适应能力的轮组结构,本文设计的行星轮组式行走机构由4组行星轮系组成,相当于8×8轮驱动。静力学分析表明,行星轮系的越障高度与轮距和轮胎直径成正比关系。随着车轮对地面作用力的不同,驱动轮系可相应地演变成定轴轮系或行星轮系,该机构保证机器具有良好的机动性,能够在平地行驶,爬楼梯,和跨越障碍等动作状态之间很好的过度转换。介绍了机器人的结构特点及其运动功能的实现。并对机器人的结构布局、轮组设计、传动方案等内容进行详细阐述。根据机器人车体主要结构参数得设计,最后绘制出CAD二维零件图及装配图。本设计所作的工作,为进一步设计出结构性能更优,控制智能更高的爬楼机器人搭建了良好的平台。

关键词:爬楼梯机器人;越障机构;轮系;传动机构设计

Abstract
 Staircase is the most common man-made obstacles, and it is also one of the main obstacle to cross for mobile robot. The thesis major introduce the designing of the wheelesets stair-climbing robot. After deeply analysis the stair-climbing frame and the object, considering the variablility of staircase climbing structure, a new type of wheelsets mechanism which can strongly adapt to the staircase was developed. The running mechanism of the planetary wheel is composed of 4 groups of planetary gear train, which is equal to the propulsion of the round of 8×8. Along with the difference of the acting force of the wheel to the ground, the propulsion train may evolve into the dead axle trains or the planetary gear train correspondingly. The analysis of the statics and kinematics indicate that the more the structure size of the planetary gear train the gauge and the tire diameter, and the structure size of the chassis the center of mass to the front axle’s distance.The mechanism ensure that the robot has good mobililty, which working modes can be well converted between the stales of travelling on the ground, climbing the functions are introduced the transmission structural characteristics of robot and realization of its kinematianism designetc of robot are decribled in detail. According to the main structure parameters of design, finally drawn 2D CAD parts and assembly plans. Overall, the thesis made a good platform for designing a better frame and more intelligent controller.
Key words:  Stair-climbing robot; Obstacle-crossing mechnism; Gear system;
 Transmission design 
目  录
摘  要 I
Abstract II

第1章  绪 论 1
1.1  论文研究的目的和意义 1
1.2  移动机器人的发展概况 1
1.3  爬楼梯机器人目前的研究状况 3
1.4  设计研究的主要内容 5
第2章 轮组式爬楼梯机器人小车的总体设计 6
2.1  轮组式爬楼梯机器人总体方案设计 6
2.1.1  轮组式爬楼助行器的设计要求 6
2.1.2  轮组式爬楼助行器的总体方案 6
2.2 轮组式爬楼助行器的机构设计 7
2.2.1  轮组式爬楼小车传动设计 7
2.2.2  轮组式爬楼小车结构设计 9
2.2.3  轮组式爬楼小车的运动状态 11
第3章  轮组式爬楼梯机器人小车的执行电机选择 15
3.1  选择电动机的技术指标 15
3.2  电机选型 15
3.3  电机功率计算 16
3.4 电池选择 17
第4章  轮组式爬楼小车传动系统设计与运动参数的计算 18
4.1  传动系统传动比计算及分配 18
4.1.1  应用平地中的行驶传动系统 18
4.1.2  应用爬楼的行驶传动系统 18
4.2 蜗杆传动设计 19
4.2.1  蜗杆与蜗轮的设计 19
4.2.2  蜗杆与蜗轮几何尺寸计算 21
4.2.3  蜗轮零件工作图设计 22
4.3  链传动的设计 23
4.3.1  大小链轮的设计 23
4.3.2  链轮几何尺寸计算 24
4.3.3 链轮零件工作图设计 25
4.4 直齿圆柱齿轮传动设计 26
4.4.1  直齿圆柱齿轮设计 26
4.4.2  直齿圆柱齿轮几何尺寸计算 28
4.4.3  直齿圆柱齿轮零件工作图设计 28
4.5  直齿锥齿轮传动设计 30
4.5.1  直齿锥齿轮设计 30
4.5.2  直齿锥齿轮几何尺寸计算 31
4.5.3  直齿锥齿轮零件工作图设计 32
第5章  轮组式爬楼小车轴的设计计算 33
5.1  轴的材料选择 33
5.2  轴的运动参数和动力参数计算 34
5.2.1  平地行驶传动系统各轴参数 34
5.2.2  爬楼驶传动系统各轴参数 35
5.3  轴的设计计算 35
5.3.1  蜗杆轴的设计计算 36
5.3.2  蜗轮轴的设计计算 37
5.3.3  锥齿轮轴的设计计算 38
5.3.4  传动轴一的设计计算 39
5.3.5  传动轴二的设计计算 40
第6章  轮组式爬楼小车的主要零部件的设计与选择 42
6.1  离合器的设计 42
6.1.1  离合器的设计要求 42
6.1.2  离合器的选择 42
6.1.3  离合器的设计计算 42
6.2  联轴器的设计 43
6.2.1  联轴器的选择 43
6.2.2  联轴器的设计计算选择 44
结  论 45
参考文献 46
致  谢 48


轮组式楼宇助行器设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:纸箱胶带封箱机设计 下一篇:花冠自动变速器实验台设计
推荐论文 本专业最新论文

点击查看关于 楼宇 设计 的相关论文题目 2012-05-06 19:21:04【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有