机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> WHX112减速机壳加工工艺及夹具设计

WHX112减速机壳加工工艺及夹具设计

本文ID:LW3002 字数:18835,页数:50

下载地址 全文下载链接(充值:118元) 如何充值?

WHX112减速机壳加工工艺及夹具设计

论文编号:JX024   包括设计论文,和所有设计图纸,字数:18835,页数:50

WHX112减速机壳加工工艺及夹具设计.png

摘要:
在生产过程中,使生产对象(原材料,毛坯,零件或总成等)的质和量的状态发生直接变化的过程叫工艺过程,如毛坯制造,机械加工,热处理,装配等都称之为工艺过程。在制定工艺过程中,要确定各工序的安装工位和该工序需要的工步,加工该工序的机车及机床的进给量,切削深度,主轴转速和切削速度,该工序的夹具,刀具及量具,还有走刀次数和走刀长度,最后计算该工序的基本时间,辅助时间和工作地服务时间。
关键词:
工序,工位,工步,加工余量,定位方案,夹紧力
Abstract :
Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally.
 Keyword:
The process, worker one, worker's step , the surplus of processing, orient the scheme , clamp strength

 

目录


摘要
Abstract


第一章  绪论………………………………………………………3
零件的工艺分析……………………………………………………3
零件的工艺分析………………………………………………… 3
确定毛坯的制造形式…………………………………………… 3
箱体零件的工艺性……………………………………………………… 3
第三章  拟定箱体加工的工艺路线……………………………………… 3
  3.1   定位基准的选择………………………………………………… 3
3.2   加工路线的拟定………………………………………………………  4
第四章  加工余量,工序尺寸及毛坯尺寸的确定……………………………… 6
  4.1   机盖………………………………………………………………………   6
  4.2   机座………………………………………………………………………   7
  4.3   机体……………………………………………………………8
第五章  确定切削用量及基本工时………………………………………………   9
  5.1   机盖………………………………………………………………………  9
机座………………………………………………………………………  14
机体………………………………………………………………………  23
夹具设计…………………………………………………………………  34
6.1   粗铣下平面夹具………………………………………………………… 34
6.2   粗铣前后端面夹具……………………………………………………… 36
参考文献  …………………………………………………………………………  40
结论  …………………………………………………………………………  41
附录  …………………………………………………………………………  42
外文资料及译文………………………………………………………………  47


WHX112减速机壳加工工艺及夹具设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:拨叉加工工艺及夹具设计 下一篇:CA6140机床后托架加工工艺及夹具..
推荐论文 本专业最新论文

点击查看关于 WHX112减速机壳 加工 工艺及夹具设计 的相关论文题目 2009-06-16 11:24:39【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有