机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 四柱万能液压机系统设计

四柱万能液压机系统设计

本文ID:LW3035 字数:5076,页数:18

下载地址 全文下载链接(充值:98元) 如何充值?

四柱万能液压机系统设计

论文编号:JX059 论文字数:5076,页数:18 附CAD图

四柱万能液压机系统设计.png四柱万能液压机系统装配图.png

摘 要

液压技术是现代制造的基础,他的广泛应用,很大程度上代替了普通成型加工,全球制造业发生了根本性变化。因此,液压技术的水准、拥有和普及程度,已经成为衡量一个国家综合国力和现代化水平的重要标志。为适合这种行势,需要大量设计一些液压机的工作系统。本次就是要设计一款四柱万能液压系统。液压技术已被世界各国列为优先发展的关键工业技术,成为当代国际间科技竞争的重点。
本书为机械类液压设计说明书,是根据液压设计手册上的设计程序及步骤编写的。本书的主要内容包括:卧式钻镗组合机床液压系统的设计课题及有关参数;工况分析;液压缸工作压力和流量的确定;液压系统图的拟定;驱动电机及液压元件的选择;液压系统主要性能的验算;设计体会;参考文献等。
编写本说明书时,力求符合设计步骤,详细说明了液压系统的设计方法,以及各种参数的具体计算方法,如压力的计算、各种工况负载的计算、液压元件的规格选取等。
本书在编写过程中,得到黄教授和同学的大力支持和帮助,在此一起表示衷心的感谢。
由于编写水平有限,书中难免有缺点和错误之处,恳请老师批评指正。
 谢谢!
关键字 四柱万能液压机, 液压缸, 系统压力
Abstract

The liquid presses the technique is the foundation of the modern manufacturing, his extensive application, the very big degree ancestors substitutes the commonness to model to process, the global manufacturing industry took place the basic sex variety.Therefore, the liquid presses the technical level, owns and universal degree, have already become measure a national comprehensive national strength and modernization level of important marking.In order to suit this kind of line of power, need a great deal of work system that designs some liquids to press the machine.This time is to  design a style four the all-powerful liquid of pillarses press the system.The liquid presses the key industry technique that the technique has already been list as by the international community to have the initiative the development, becoming the point of a science and technology competition.
This book presses to design the manual for the machine liquid, pressing to design the design on the manual procedure and the step plaits to write according to the liquid of.The main contents of this book include:The lie type drills the design topic and relevant parameters that the combination  tool machine liquid presses the system;The work condition analysis;The liquid presses the assurance of an urn of work pressure and discharges;The liquid presses the draw-up of the system diagram;Drive the choice that the electrical engineering and liquids press the component;The liquid presses the main function of system to check to calculate;The design realize;Reference etc..
When plait write this manual, try hard for to match to design the step, elaborate on the liquid to press the design method of the system, and the concrete calculation method of various parameter, press the specification selection of the component such as the calculation, liquid of calculation, various work  condition load of pressure etc..
This book gets the relevant teacher and classmate to support strongly and help in weave write process, meaning the heartfelt with gratitude together here.
Because the plait writes the level limited, difficult do not need the place of weakness and mistake in the book, plead the teacher the animadversion correct.
 Thanks!
【Key word】  four the all-powerful liquid of pillarses press the machine, the liquid presses the urn, system pressure

目     录
第一章   设计课题及主要技术参数、工作原理 1
1.1设计课题 2
1.2设计参数: 4
第二章  工况分析 6
2.1绘制液压缸速度循环图、负载图 6
2.2参数 6
第三章 确定液压缸参数 7
第四章  液压元、辅件的选择 9
4.1液压元件的选择 9
4.2液压辅件的选择 11
第五章  液压系统主要性能验算 14
5.1系统压力损失计算 14
5.2系统效率计算 15
5.3系统发热与升温计算 16
设计心得 17
参考文献 18


四柱万能液压机系统设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:半自动液压专用铣床液压系统的设计 下一篇:万能外圆磨床液压传动系统设计
推荐论文 本专业最新论文

点击查看关于 四柱万能液压机系统设计 的相关论文题目 2009-06-17 15:56:46【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有