机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 设计“CA6140车床拨叉”零件的机械加工工艺及设计

设计“CA6140车床拨叉”零件的机械加工工艺及设计

本文ID:LW3151 字数:11182 页数:32

下载地址 全文下载链接(充值:118元) 如何充值?

设计“CA6140车床拨叉”零件的机械加工工艺及设计

论文编号:JX191  所有图纸,任务书,论文字数:11182 页数:32

设计“CA6140车床拨叉”零件的机械加工工艺及设计.png设计“CA6140车床拨叉”零件的机械加工工艺及设计装配图.png

摘     要

       车类机床主要用于加工各种回转表面,如内外圆柱表面、圆锥表面、成型回转表面和回转体的端面等,有些车床还能加工螺纹面。由于多数机器零件具有回转表面,车床的通用性又较广,因此在机器制造厂中,车床的应用极为广泛,在金属切削床中所占的比重最大,约占机床总台数的20%~35%。
作为主要的车削加工机床,CA6140机床广泛的应用于机械加工行业中,适用于车削内外圆柱面,圆锥面及其它旋转面,车削各种公制、英制、模数和径节螺纹,并能进行钻孔,铰孔和拉油槽等工作。床身宽于一般车床,具有较高的刚度,导轨面经中频淬火,经久耐用。机床主轴孔径大,操作灵便集中,溜板设有快移机构。机床结构刚度与传动刚度均比较高,功率利用率也比较高,适于强力高速切削。
卧式机床的加工对象,主要是轴类零件和直径不太大的盘类零件,故采用卧式布局。其主要部件有:主轴箱、刀架、尾座、进给箱、溜板箱以及床身。本设计主要针对CA6140机床的主轴箱进行设计。机床主轴箱是一个比较复杂的传动部件。设计的内容主要包括确定机床的主要参数,拟定传动方案和传动系统图,计算和校核了主要零部件,并且利用专业制图软件进行了零件的设计和处理。
 

关键词:CA6140机床  零件 传动

Abstract

        The lathe class machine tool mainly was used in to process each kind of rotation surface, like inside and outside periphery, the circular cone surface, take shape the rotation surface and the gyre end surface and so on, some lathes also can process whorl. Because the most machine part has the rotation surface, lathe versatility broader, therefore in machine shop, lathe application extremely widespread, accounts for the proportion in the metal cutting bed to be biggest, approximately composes the machine tool main station number 20% ~ 35%.
As the main turning processing machine tool, the CA6140 machine tool was widespread used in the machine-finishing profession, it is used in turning inside and outside the turning the round cylinder, taper and gyre, turning each kind of metric system, the British system, the modulus and the diameter festival thread, and can carry on the drill hole and pulls work and so on fuel tank. The lathe bed width to the common lathe , has a higher rigidity, the facade of the lead after middle frequency quenching, so it will be durable. The machine tool main axle aperture is big, the operation agile centralism, the apron is equipped with quickly moves the organization.  machine tool structure rigidity and transmission rigidity quite high, the power use factor quite is also high, is suitable for the force high-speed cutting.
The horizontal-type machine tool processing object, mainly is the axis class components and the diameter not too big plate class components, therefore uses the horizontal-type layout. Its major component includes: headstock, tool slide, tailstock, feedbox, apron and bed. This design mainly aims at the headstock of the CA6140 machine tool .The headstock of machine tool is a quite complex transmission part. The design content mainly includes determines the machine tool’s main parameter, Draws up the transmission plan and the transmission scheme, Calculated and examined the main spare part,And used specialized charting software to carry on the components design and processing.


key words:CA6140machine tool     part  transmission


目  录
第1章 机床的规格和用途…………………………………………………9
第2章 机床主要参数的确定………………………………………………10
第3章 零件的分析…………………………………………………………12
3.1 零件的作用………………………………………………………12
3.2 零件的工艺分析…………………………………………………12
3.3 确定生产类型…………………………………………………..12
3.4 确定毛坯…………………………………………………………13
第4章 工艺规程设计……………………………………………………..14
4.1 选择定位基准……………………………………………………14
4.2 制定工艺路线…………………………………………………..14
4.3 选择加工设备和工艺设备………………………………………14
4.4 机械加工余量、工序尺寸和公差的确定………………………15
第5章 夹具设计………………………………………………………….21
5.1 CA6140拔叉夹具的工艺分析…………………………………..21
5.2 定位夹紧方案的确定…………………………………………..21
5.3 刀具的选择及切削用量的选择…………………………………21
5.4 夹具体设计……………………………………………………..23
5.5 问题的提出………………………………………………………27
第6章 经济性分析……………………………………………………….28
6.1箱体结合件加工工艺制定……………………………………..28
6.2 夹具定位加紧分析……………………………………………..28
6.3 组合机床应用分析………………………………………………29
结论…………………………………………………………………………30
致谢…………………………………………………………………………31
参考文献……………………………………………………………………32


设计“CA6140车床拨叉”零件的机械加工工艺及设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:收放机架安装支架建模和冲压工艺.. 下一篇:驱动式滚筒运输机
推荐论文 本专业最新论文

点击查看关于 设计“CA6140车床拨叉”零件 机械加工工艺及 的相关论文题目 2009-06-18 11:23:46【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有