机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 接触片冲压模设计

接触片冲压模设计

本文ID:LW45714 字数:9861.页数:33

下载地址 全文下载链接(充值:168元) 如何充值?

接触片冲压模设计

论文编号:JX1678  论文字数:9861.页数:33 附任务书,开题报告,外文翻译,答辩PPT,CAD图,UG三维图

接触片冲压模设计.png

 接触片的冲压模设计
 【摘要】本文阐述了冲压模具的概况、特点、以及在各方面的应用情况,对接触片的工艺性、经济性分析、排样图的设计、模具的方案确定、模具结构设计、模具装配图与零件图的绘制。
 接触片包括冲孔和落料两个基本工序,由于零件是大批量生产,因采用级进冲裁,以提高生产效率,方便操作。该零件材料厚度较薄,尺寸小,近似 T 形,采用45 度的斜对排样。为了保证零件的精度,模具采用导料板导向,侧刃定距的定位方式。零件厚度较薄,采用弹性卸料方式和导向相对平稳的对角导柱模架。
 【关键词】 级进模 ;排样; 冲孔; 落料
 
  Contact strip ramming mold design
 [Abstract]: This article elaborated the ramming mold survey, the characteristic, as well as in various aspects application situation, to contact strip technology capability, efficient analysis, platoon specimen map design, mold plan determination, mold structural design, mold assembly drawing and detail drawing plan.
  The contact strip and falls the material two essential working procedures including the punch holes, because the components are the mass production, because uses the level to enter the blanking, enhances the production efficiency, facilitates the operation. This components material thickness is thin, the size is small, the approximate T shape, uses 45 degree diagonally opposite row of type. In order to guarantee the components the precision, the mold uses leads the yard lumber guidance, leans locate mode which the edge is apart from surely. Components thickness is thin, selects the elastic ex-denning method and the guidance relatively steady opposite angle guide pillar pould frame.
  [Key words]: The level enters the mold; Row of type; Punch holes; Falls the material

目录
毕业设计(论文)任务书  Ⅰ
开题报告       Ⅱ
中文摘要     Ⅵ
外文摘要    Ⅶ
1  序 言 1
 1.1 冲压冲压的概述、特点及应用 1
 1.2 接触片冲压模具的课题研究意义 2
 1.3 接触片冲压模具的课题研究主要内容 2
2  工件的工艺性分析 3
 2.1 冲压件的工艺性分析 3
 2.2 冲压加工的经济性分析 4
 2.3 确定工艺方案 4
3  主要工艺参数计算 5
 3.1 排样图分析 5
 3.2 计算冲压力 10
 3.3 计算压力中心 12
 3.4 选择冲压设备 12
 3.5 凸、凹计算及间隙的刃口尺寸的确定 13
4  模具主要零件及结构设计 17
 4.1 卸料板的设计计算 17
 4.2 定位导向机构的设计 19
 4.3 凸、凹模的尺寸设计 19
 4.4 固定板的设计计算 20
 4.5 模柄和模座的设计 21
 4.6 模具的闭合高度计算 23
 4.7 压力机的验证计算 23
5  绘制零件图、装配图及UG零件图 24
 5.1 绘制装配图 24
 5.2 绘制UG零件图 28
6  总结 29
参考文献 30
致谢        31


接触片冲压模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:空气室上体注射成型工艺分析与模.. 下一篇:机床手柄注塑模具设计
推荐论文 本专业最新论文

点击查看关于 接触 冲压模 设计 的相关论文题目 2012-09-29 20:40:41【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有