机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 摩托车尾灯罩成型工艺及模具设计

摩托车尾灯罩成型工艺及模具设计

本文ID:LW45718 字数:20117.页数:38

下载地址 全文下载链接(充值:168元) 如何充值?

摩托车尾灯罩成型工艺及模具设计

论文编号:JX1682  论文字数:20117.页数:38 附任务书,开题报告,外文翻译,答辩PPT,CAD图

摩托车尾灯罩成型工艺及模具设计.png

摩托车尾灯罩成型工艺及模具设计
[摘要]本文综述了国内外模具设计及制造的现状与发展趋势,并指出CAD/CAE在模具设计中的应用及重要意义。本设计介绍了摩托车后灯尾罩塑料模具设计。首先对灯罩进行了详细的工艺性分析,由此确定出制品材料,模具的基本方案,并对制品材料PMMA的性能做了详细的介绍。在进入模具结构设计前,论述了注射成型的基本原理,介绍了双分型面注射模具的结构与工作原理。根据成型的需要,对所选注塑机的各个参数进行了详细校核。在进行模具结构设计中,通过MoldFlow软件进行流体分析,使设计出的模具浇注系统更合理更可靠,同时还重点介绍了该摩托车后灯尾罩注射模具的顶出系统和侧向抽芯系统。本设计的侧抽芯结构的设计上采用斜导柱进行侧抽芯,并对抽拔力进行了详细计算且对斜导柱进行了强度校核。根据模具各部位采用的材料,对模具进行了强度的具体计算,以满足安全高效生产的要求。模具结构采用PRO/E4.0软件设计,并生成工程图,在用AutoCAD2004进行修改完善,使设计的效率和准确性提高,通过这种经验数据与专业软件数值模拟相结合的设计方法,完成了摩托车后灯尾罩注塑模具的完整的结构与零件设计。
[关键词]:PMMA;摩托车后灯尾罩;注塑模具;双分型面;斜导柱

The Mould Design and Molding Crafts of Motorcycle tail lamp
[Abstract]  This paper mainly talks about the situation and tendence of mould design in domestic and overseas countries,and points out CAD/CAE in the mold design application and the important meaning.The mould design of motorized rear tail lamp cover was introduced in this paper. First has carried on the detailed technological analysis to the chimney, from this determines the product material, mold's basic scheme, and has made the detailed introduction to the product material PMMA performance. Before entering the mold structural design, elaborated the injection molding basic principle, introduced the duplex profile injects mold's structure and the principle of work.According to the need of forming,the parameters of injecting machine was checked out detailedly. In carries on the mold structural design, the software carries on the fluid analysis through MoldFlow, causes the mold gating system which designs to be more reasonable is more reliable, meanwhile introduced with emphasis this motorized rear lamp tail cover injects the mold extruding system and lateral pulls out the core system. The incline guide pins were adopted,the drawing strength was computed clearly,and the intensity of the incline guide pins were checked out particularly.According the different materials of the mould,the intensity of the mould was computed clearly,in order to fullfil the request of safe and high efficient production. The mold structure uses the PRO/E4.0 software design, and produces the engineering plat,then using AutoCAD2004 to make the revision to consummate, causes the design the efficiency and the accurate enhancement,through the combination of experienced data and professional software,the design of the mould structure and its parts were completed efficiently.
[Key word]:PMMA; motorized rear tail lamp cover;injecting mould; duplex profile;incline guide pins

 

目录
毕业设计任务书…………………………………………………………………..…...I
开题报告 ………………………………………………………………………..……II
中文摘要 ……………………………………………………………………………VI
外文摘要……………………………………………………………………………VII
前 言……………………………………………………………………………….VIII
1  选题背景 1
1.1 研究的目的与意义 1
1.2国内外现状和发展趋势与研究的主攻方向 1
1.2.1模具工业在国民经济中的重要地位 1
1.2.2国外模具的发展趋势 2
1.2.3我国模具技术的现状及发展趋势 3
1.2.4主攻方向 3
1.3  注塑模具CAD/CAE发展概况及应用 4
1.4  研究内容 5
2  灯罩成型工艺方案分析 6
2.1  制品信息 6
2.2  材料选择 6
2.3  成型特性及条件 7
2.3.1  工艺特性 7
2.3.2  注塑成型加工工艺 8
2.4  模具结构方案 8
3  注射机的选择 9
3.1  注塑成型工艺简介 9
3.2  注塑机的选择 10
3.2.1  注塑机简介 10
3.2.2  注塑机基本参数 10
3.2.3  选择注塑机 11
3.3  注射机的校核 12
3.3.1  最大注塑量的校核 12
3.3.2  锁模力的校核 12
3.3.3  塑化能力的校核 13
3.3.4  模具厚度校核 13
3.3.5  模具安装尺寸校核 13
3.3.6  开模行程校核 14
4  浇注系统设计 14
4.1  分型面的确定 14
4.2  型腔数目的确定 15
4.3  浇注系统的设计 15
4.3.1  主流道的设计 15
4.3.2  分流道设计 16
4.3.3  浇口设计 17
5  型腔,型芯的结构设计 19
5.1  凹模的结构设计 19
5.1.1  凹模的结构形式 19
5.1.2  型腔壁厚和底板厚度 19
5.2  型芯的结构设计 21
5.3  动模垫板厚度计算 21
6  侧向分型及抽芯机构 21
6.1  斜导柱侧向分型与抽芯机构 22
6.2  斜导柱的工作参数 23
6.2.1  抽拔力的计算 23
6.2.2  抽芯距的计算 23
6.2.3  斜导柱倾斜角度确定 23
6.2.4  斜导柱直径的计算 23
6.2.5  斜导柱长度和最小开模行程 24
6.3  斜导柱的材料及安装配合 25
6.4  导滑槽设计 25
7  导向机构设计 25
7.1合模导向机构 25
7.2  导向机构设计 26
7.2.1  导柱的选择 26
7.2.2  导套选择 26
8  顶出机构设计 26
8.1  顶出机构类型 27
8.2  脱模力计算 27
8.3  推杆参数的计算 28
8.4  接触压力校核 28
8.5  推杆的布置 28
8.6  排气设计 29
9  温度调节系统设计 30
9.1  温度调节对塑件质量的影响 30
9.2  对温度调节系统的要求 30
9.3  冷却系统设计 30
10  模具材料 31
11  模具结构图 31
结论 33
参考文献 34
致谢 35


摩托车尾灯罩成型工艺及模具设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:汽车横梁后悬架推力杆冲压工艺及.. 下一篇:模具电火花加工成形机床纵向进给..
推荐论文 本专业最新论文

点击查看关于 摩托 车尾 灯罩 成型 工艺 模具设计 的相关论文题目 2012-09-29 20:52:48【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有