机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 客车离合器总成设计

客车离合器总成设计

本文ID:LW5277 字数:16181.页数:39

下载地址 全文下载链接(充值:128元) 如何充值?

客车离合器总成设计

论文编号:JX404  包括设计图,论文字数:16181.页数:39

客车离合器总成设计.png客车离合器总成设计装配图.png

摘    要
离合器是客车传动系中直接与发动机相连接的总成,其功用是切断和实现对传动系统的动力传递,以保证客车起步时将发动机与传动系平顺地接合,确保客车平稳起步;在换档时将发动机与传动系分离,减少变速器中换档齿轮之间的冲击;在工作中受到最大的动载荷时,能限制传动系所承受的最大转矩,防止传动系各零件因过载而损坏;有效地降低传动系中的振动和噪声。在现代客车设计中,膜片弹簧式离合器应用越来越广泛。
本设计采用系统化设计方法讨论膜片弹簧式离合器设计,并根据离合器的功能和结构,把离合器分为主动部分、从动部分、分离机构和操纵机构等部分。根据其实际运用要求,设计中详细介绍离合器功能和工作原理,阐明了设计目的,分析了膜片弹簧及离合器从动盘特点,并对离合器主要部分:摩擦片、压盘、膜片弹簧等进行了计算。

关键词:离合器;从动部分;膜片弹簧;发展;设计

 

Clutch assembly design of bus and coach

Abstract
The clutch is the assembly, which directly connect the engine and the transmission. Its function is a cutting and realization in the power deliver of transmission, connecting the engine and the transmission are kept smoothly while the bus and coach is going to start, in order to insure the steady start of vehicle; While shifting gear, it separates the clutch and the gearbox, reduces the impact of shift gear between gears in the gearbox; While being dynamic load up to the maximum in the operate, it can limit the breakdown torque, pull out torque that the transmission depart bear, keep each parts of transmission from damage because of the overload; Reduce vibrate and noise within the transmission availably. Diaphragm clutch is used widely in modern vehicle.
The design uses a systematic design method to discuss the design of diaphragm spring clutch, and in accordance with the functions and structure of the clutch, divided into active part of the clutch, the driven part of the separation and manipulation of body parts. Practical application in accordance with its requirements, clutch design in detail the functions and working principle, designed to set out, analysis of the diaphragm spring and clutch plate follower characteristics, clutch and main parts: friction plate, pressure plate gap, such as diaphragm spring calculated. Clutch and main parts: friction plate, pressure plate gap, such as diaphragm spring calculated.

Key words: Clutch; Driven in part ; Diaphragm Spring; Development; Design

目    录
摘    要 I
Abstract II
一、绪论 1
(一)离合器概述 1
(二)离合器的功用 1
(三)离合器发展历史 2
(四)现代客车离合器应满足的要求 4
(五)研究内容和目的 4
(六)设计方案的选择 5
二、膜片弹簧离合器的结构及其特点 6
(一)膜片弹簧离合器的结构 6
(二)膜片弹簧离合器的工作原理 6
(三)膜片弹簧离合器的优点 7
三、 离合器基本尺寸参数选择 9
(一)离合器基本性能关系式 9
(二)后备系数的选择 9
四、离合器主动部分设计 11
(一)压盘设计 11
(二)离合器盖设计 12
(三)传动片设计 12
五、离合器从动盘总成设计 13
(一)摩擦片设计 13
(二)从动盘毂设计 16
(三)从动片设计 17
(四)扭转减振器设计 17
六、离合器膜片弹簧的设计 23
(一)膜片弹簧的概念 22
(二)膜片弹簧的优化设计 22
(三)膜片弹簧的弹性特性 25
(四)膜片弹簧的强度计算 27
(五)膜片弹簧基本参数的选择 28
结    论 31
参 考 文 献 32
致    谢 33


客车离合器总成设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:12分米轴罩衬板加工工艺规程设计 下一篇:自动弯管机装置及其电器设计
推荐论文 本专业最新论文

点击查看关于 客车 离合器 总成 设计 的相关论文题目 2009-11-13 09:25:44【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有