机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 纳米粉体的实验装置

纳米粉体的实验装置

本文ID:LW5720 字数:30646.页数:69

下载地址 全文下载链接(充值:128元) 如何充值?

纳米粉体的实验装置

论文编号:JX445  有图纸,  说明书字数:30646.页数:69

纳米粉体的实验装置.png纳米粉体的实验装置装配图.png

摘  要

   纳米科技是二十世纪八十年代发展起来的一门新兴交叉、前沿学科。在二十一世纪纳米科技是三大重要技术之一,属于前沿性课题之一。其中纳米粉体的制备是纳米科技的重要研究内容之一。蒸发冷凝法制备纳米粉体是一种较早的物理方法,本文用电弧法制备,也是属于蒸发冷凝法的一种。
   本文首先介绍了纳米科技的基本知识及其发展状况和应用前景。然后设计了一套电弧加热法制备纳米粉体的实验装置。该装置的工作原理是在一定压力的惰性气氛或反应气氛中,将金属等材料作为电弧的电极,使其在高温电弧等离子的作用下被溶化、蒸发。蒸汽遇到周围的气体就会被冷却或发生反应形成超微粉。该系统共有加热系统、真空系统、生成室、收集室等几部分组成。首先针对纳米颗粒的生产条件设计了生成室和真空系统。然后用电弧加热制备生成纳米蒸汽。冷阱采用了不断输入液氮实现了急速冷却,使蒸汽快速成核以保证纳米尺度。最后通过采用手套箱结构的收集装置实现真空室中粉体的包装从而避免了氧化。整个系统易于加工实现,能够满足制备纳米微粒的实验需求。


 关键词:纳米粉体; 电弧加热; 制备; 冷阱 

Abstract
 
 Nanotechnology is developing a newcross-cutting, cutting-edge disciplines in the eighties of the twentieth century. Nanotechnology in the twenty-first century technology is one of the three most important are the forefront of one of the topics. Preparation of nano-powder of which is an important research nanotechnology one. Prepared by evaporation condensation nanopowder is a physical method earlier in this paper was prepared by arc, but also belong to a kind of evaporation condensation method.
 This article introduces the basic knowledge of nanotechnology and its development and application prospects. Arc and then designed a nano-powders prepared by heating of the experimental apparatus. The working principle of the device is in a certain atmosphere of pressure of inert or reactive atmosphere, such materials as metal arc electrodes, so that at a high temperature arc plasma melting under the role of evaporation. Encountered in the surrounding gas steam will be cooled or the formation of ultrafine reaction. The system total heating system, vacuum system, to generate room, the collection consists of several rooms. First of all, for the production of nanoparticles designed to generate conditions of rooms and vacuum system. Preparation of arc and then use to generate nano-steam heating. Cold trap using liquid nitrogen to achieve a constant input of rapid cooling, so that rapid nucleation of steam to ensure that the nanometer scale. Finally, through the use of glove-box structure of the collection device to achieve a vacuum packed powder chamber to avoid oxidation. The realization of the entire system is easy to process, prepare to meet the experimental needs of nanoparticles.


Key words: nano-powder;  arc heating;  Preparation;  cold trap

 


目    录

第一章  绪 论 1
第1.1节 引 言 1
第1.2节  金属纳米粉的制备方法概述 4
1.2.1机械法 4
1.2.2物理法 5
1.2.3化学法 6
第1.3节  纳米粉体制备及应用国内外现状 7
1.3.1纳米粉体制备及应用的国内现状 7
1.3.2纳米粉体制备及应用的国外现状 9
第1.4节  本文研究的主要内容 11
第二章  电弧法制备金属纳米粉研究 13
第2.1节  电弧 13
2.1.1电弧物理 13
2.1.2弧柱中的气体电离 14
2.1.3电极的电子发射 16
2.1.4电弧的物理特性 18
第2.2节  电弧的应用 23
第2.3节  电弧制取金属纳米粉体 24
2.3.1电弧法制备金属纳米粉体的原理 25
2.3.2金属纳米粉成核机理 26
第三章  真空系统的设计 28
第3.1节  实验装置的整体结构设计 28
第3.2节  真空系统的设计 29
3.2.1真空获得设备——真空机组及其选用 30
3.2.2真空容器的设计 33
3.2.3真空测量系统 44
第3.3节  真空系统设计中的注意点 46
第3.4节  真空管路 48
第3.5节  真空材料 48
第3.6节  本章小结 49
第四章  加热装置的设计 50
第4.1节  电弧加热原理 50
第4.2节  水冷电极 51
4.2.1水冷电极的设计要点 51
4.2.2 加热阴极的设计 52
4.2.3加热阳极的设计 53
4.2.4引弧装置的简介 54
第4.3节  本章小结 56
第五章  粉体的生成与收集 57
第5.1节  粉体获得装置 57
5.1.1冷阱装置 57
5.1.2刮刀 58
第5.2节  收集室 59
第5.3节  其它系统 60
5.3.1气路保护 60
5.3.2过滤膜 61
第5.4节  本章小结 61
第六章  结论与展望 62

英文原文……………………………………………………….66
中文译文…………………………………………………………………81


纳米粉体的实验装置......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:青饲料切割机的设计 下一篇:可调速钢筋弯曲机的设计
推荐论文 本专业最新论文

点击查看关于 纳米 粉体 实验 装置 的相关论文题目 2010-03-16 22:32:37【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有