机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 安全摩擦离合器设计

安全摩擦离合器设计

本文ID:LW6170 字数:22946,页数:80

下载地址 全文下载链接(充值:128元) 如何充值?

安全摩擦离合器设计

论文编号:JX475   有设计图,论文字数:22946,页数:80 有开题报告,任务书

安全摩擦离合器设计.png安全摩擦离合器设计装配图.png

摘要
 为了提高传统离合器在一些工作环境下的安全性能及优化离合器的结构,本文主要设计了一款新型安全摩擦离合器,该离合器结构紧凑、重量轻、耗电量小,能直接安装在减速器的输入轴上。可广泛应用于矿山石油钻探、建材锻压机床、渔轮等机械行业的各种输入轴上,因此,具有良好的使用和推广价值。
 本次设计的安全摩擦离合器的结构形式采用闸块式离心摩擦离合器。该离合器主要包括传动部分、分离部分和输出部分,传动部分由传动部分由传动轴4、弧行板8、传动板14等组成,分离部分由支座11、偏心轴1、扭转弹簧12等组成,而输出部分由外壳7、外壳10、轴套3等组成。设计主要涉及离合器的结构设计及相关尺寸的确定。
 通过本次设计位社会提供了一种工作可靠、安全保护的新型离心式离合器。
 
关键词  离心离合器  弧行板  安全保护  
  
Abstract
 
 In order to improve the security of the traditional clutch in some working condition and optimize its structure,this article mainly design a new security friction clutch,this type is in the characteristic of brief structure,light weight and little working electricity, and it can be connected with the input shafts of speed-reducer directly. It also can be widely used in the various input shaft such as mine and oil exploiting ,forging lathes in architecture, fishing boats and so on, which enable it good using and spreading value.
 The structure of the security friction clutch design takes the brake-rod-shoe centrifugal friction clutch. This clutch is made of three components: driving parts, separating pats and output parts, in which driving shaft 4,arc rotor 8 , coupling 14 and some other pieces constitute the driving parts, holding cover 11,centrifugal shaft 1 ,torsion spring 12 consist of the separating parts, while the output parts is composed of outside drum wall 7 and 10,shaft cover 3.And the majority of the design involves the structure design and the fixing of dimension .
 A new kind of security friction clutch that works reliable and secure is provided through this design.
 
 Keywords: centrifugal clutch   arc rotor    security and protection
 
 
目录
摘要 I
Abstract II
目录 3
第1章 绪论 1
 1.1 选题意义 1
 1.2 离合器的概述 1
 1.2.1 离合器的功用与分类 1
 1.2.2 离合器的选择和工作性能参数 3
 1.2.3 离心离合器的有关概述 5
 1.2.4 1.24安全离合器的有关概述 5
第2章 安全摩擦离合器的方案设计 6
 2.1 方案设计 6
 2.1.1 方案一 6
 2.1.2 方案二 9
 2.2 方案选择 11
第3章 离合器传动部分的结构设计与计算 12
 3.1 电动机的选择 12
 3.1.1 电动机的额定功率及转速 12
 3.1.2 载转矩 12
 3.1.3 离合器的计算转矩 13
 3.2 主传动轴的结构设计及计算 14
 3.2.1 材料选择 14
 3.2.2 初估轴的直径 14
 3.2.3 轴上键的选择 15
 3.2.4 轴的结构设计及尺寸确定 16
 3.3 主传动轴上的圆盘的结构设计及计算 18
 3.3.1 主传动轴上的圆盘示意图 18
 3.4 弧行板的结构设计及尺寸计算 20
 3.4.1 弧行板的尺寸计算 21
第4章 离合器的分离装置的结构设计及计算 25
 4.1 分离装置的结构分析 25
 4.1.1 分离装置的结构概述 25
 4.2 分离装置的结构的计算 25
 4.2.1 偏心轴的设计 25
第5章 零部件的校核 32
 5.1主传动轴的校核 32
 5.1.1轴的受力图如下 32
 5.1.2弯矩的计算 33
 5.1.3按弯扭合成应力校核轴的强度 34
 5.2轴承寿命的验算 34
 5.3螺栓组的强度校核 35
 5.4挂钩销轴的校核 37
第6章 离合器输出部分的结构设计 39
 6.1 外壳Ⅰ的结构设计及计算 39
 6.1.1 外壳Ⅰ的结构示意图 39
 6.1.2 外壳Ⅰ的结构计算 39
 6.2 外壳Ⅱ的结构设计及尺寸确定 41
 6.2.1 外壳Ⅱ的结构示意图 41
 6.2.2 外壳Ⅱ的尺寸计算 41
第7章 离合器摩擦块的寿命计算 43
 7.1 离合器接合过程的时间和滑摩功的计算 43
 7.2 离合器所受压力 51
 7.3 离合器的发热计算 51
 7.4 离合器的值 52
 7.5 离合器的磨损系数 53
 7.6 离合器摩擦元件的寿命计算 53
结论 55
致谢 56
参考文献 57
附录1 58
附录2 66


安全摩擦离合器设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:轿车脚踏板焊接机器人的整体设计 下一篇:耙斗式装岩机的部分结构设计
推荐论文 本专业最新论文

点击查看关于 安全 摩擦 离合器 设计 的相关论文题目 2010-03-29 08:47:29【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有