机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 赛豹车工具箱盖单型腔注塑模设计

赛豹车工具箱盖单型腔注塑模设计

本文ID:LW6918 字数:29482,页数:58

下载地址 全文下载链接(充值:128元) 如何充值?

赛豹车工具箱盖单型腔注塑模设计

论文编号:JX501   论文字数:29482,页数:58  有设计图,外文翻译

赛豹车工具箱盖单型腔注塑模设计.png

摘要

 近几年模具行业发展迅速,尤其是注塑模具产品应用广泛,模具生产出来的制品具有高精度、高复杂性、高一致性、高生产率和低消耗等优点,模具制品无论是在工业设计方面还是生活用品中都被广泛运用。使用模具生产模架结构简单,材料的利用率高,随着中国模具汽车工业的快速发展,模具成型已成为当代工业生产的重要手段,成为多种成型工艺中最有潜力的发展方向。汽车模具的设计与制造也呈现了广阔的市场,汽车的各零部件大多数都由模具成型,为工业的迅速发展起到了重要的作用。对于赛豹工具箱盖的成型采用双分型面,分析了模具的各方面对成型质量影响的因素,重点在于浇口位置的合理布置,设计的难点在于斜导柱和斜推杆共同作用成型的三个侧孔,脱模时完成斜导柱侧抽芯,保证足够的抽芯距,侧孔的成型,冷却系统的合理布置等,用CAD画出塑件的三视图,清晰地表达塑件的成型。

关键词:模具;浇口;斜导柱;侧抽芯机构;斜推杆

Abstract

 In recent years the rapid development of the industry mold,in particular is widely used injection mold products,mould produced the products with high precision and high complexity,high consistency,high productivity and low consumption advantages,die products both in industrial design in terms of daily necessities have been in wide use. Use mold-Mould Base simple structure the high utilization,with China's rapid development of the auto industry die,die forming contemporary industrial production has become an important means. For the rapid development of industry has played an important role. For saibao leopard toolbox covered forming a single-type surface,analysis of the mold of the parties forming the face of the factors affecting the quality. Focus on the rational layout gate location. The difficulty lies in the design ramps and ramps lead-role in putting together forming the three hole. Stripping completed ramp-side core pulling Ⅱ. Ensure adequate core pulling away from that side of the hole molding,cooling systems,such as the rational layout. CAD painted plastic parts with the three view,to express clear plastic parts molding.

Key words: Mold;Gate;Ramp-Introduction;Side core pulling bodies;Ramp Putter

论文目录,请与本站客服联系查看。


赛豹车工具箱盖单型腔注塑模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:赛豹车烟灰缸盖双型腔注塑模设计 下一篇:赛豹车中控盒后烟灰缸支架双型腔..
推荐论文 本专业最新论文

点击查看关于 工具箱 单型腔 注塑模 设计 的相关论文题目 2010-05-11 15:48:41【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有