机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 路宝车烟灰合盒双型腔注塑模设计

路宝车烟灰合盒双型腔注塑模设计

本文ID:LW6925 字数:24583,页数:50

下载地址 全文下载链接(充值:128元) 如何充值?

路宝车烟灰合盒双型腔注塑模设计

论文编号:JX508   论文字数:24583,页数:50  有设计图,外文翻译

路宝车烟灰合盒双型腔注塑模设计.png

摘  要
 随着塑料工业的发展,塑料注塑模已经成为塑料制品接着介绍了注塑模的整个设计流程,分析塑件、选取注射机并作出部分参数的校核,然后是注塑模的整体设计,包括成型塑件几何形状和尺寸的成型部分及其零部件设计、输送熔融塑料的浇注系统设计、排出影响塑件精度气体的排溢与引气系统设计、这里只进行冷却系统设计的温度调节系统设计、分离并取出成型塑件的脱模机构设计以及模架设计。的主要成型方法之一。
 针对路宝车组合仪表罩注塑模的设计,本文首先介绍了课题选择的依据和意义、课题的国内外研究现状、课题的主要内容及拟采取的方法、设计的难点与解决方法和注塑模的发展前景的简述。本文利用UG绘图软件完成成型部分及其零部件的设计,另外利用斜导柱和活动型芯完成塑件上侧向凹孔的抽芯动作,凹孔耳座的脱出由组合斜滑块完成。论文最后阐述了此次设计的心得体会。

关键词:注塑模 ;冷却系统;浇注系统;侧向抽芯机构;斜滑块

 

Abstract

 With the development of the plastic industry, the plastic injection mould has already been become one of main methods of manufacturing plastic products.
 By designing Ming Yi automobile combinative instrument cover, this paper firstly introduces the choosing basis and significance of the subject, its home and abroad studying station and main studying contents with its adopting methods, design’s difficulties and solutions, briefly expounding its development prospects. Next, the whole design process of injection mould is introduced, that is, analysis plastic part, choose injection machine with some of its parameters being checked so as to satisfy design demands, then the injection mould overall design is introduced, such as the forming parts and components design forming plastic part’s geometry and dimension, the pouring systems design transporting melt plastics, the overflow and bleed system design discharging air which affects plastic part’s precision, the temperature adjusted system design only designing the cooling system here, demould mechanism design isolating and retrieving already molding part, and mould-frame design. UG drawing software is utilized to accomplish the forming parts and components design, in addition helix-pillar and moving-core are used to form and extract the side-hole, helix-slider is used to extract the pock-hole’s block ears. Experiences are expounded in the end of the paper.

Keywords:Injection mould ;Cooling system;Pouring system;
           Side-extracting core mechanism ;Helix-slider

论文目录,请与本站客服联系查看。


路宝车烟灰合盒双型腔注塑模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:锐意车中控盒挡板双型腔注射模设计 下一篇:路宝车控制面罩双型腔注塑模设计
推荐论文 本专业最新论文

点击查看关于 路宝车 烟灰 双型腔 注塑模 设计 的相关论文题目 2010-05-11 21:16:26【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有