机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 锁拉线扣手注塑模设计

锁拉线扣手注塑模设计

本文ID:LW6936 字数:22598,页数:45

下载地址 全文下载链接(充值:128元) 如何充值?

锁拉线扣手注塑模设计

论文编号:JX518   论文字数:22598,页数:45  有设计图,外文翻译

锁拉线扣手注塑模设计.png锁拉线扣手注塑模设计装配图.png

摘  要
 随着塑料工业的发展,注塑模具在现代工业中起着越来越重要的作用。本文主要介绍了塑料注塑模设计的方法及过程,分析了模具成型结构对塑件质量的影响。本文通过对塑件的结构分析,并用UG三维实体设计画出本塑件的外型结构,然后进行了模具的脱模机构、冷却系统、型芯、抽芯机构、模架和导向机构等的设计。侧抽芯机构的设计是设计的重点和难点。我们经分析采用了斜导柱侧抽的方法,既经济又有效,能够很好的解决这个问题。
 读者通过阅读本文,可以为其它的注塑模设计提供很好的参照。
关键词:模具  斜导柱  侧抽芯机构  型芯

 


Abstract
 With the development of the plastic industry, the mould plays a more and more important role in modern industry to mould plastics. This paper mainly introduces the method and the  process of the injecting mold designing, and analyses the influence of mould shaping structure to the quality of moulds.After the structure analysing of the mould,draw and design the appearance.structure with the UG three dimensional entity designing, then carry on drawing of patterns organization, cooling system of mould, core, mould shelf and design to lead organization,etc.. Core-pulling structure is the emphsis and difficulty of the article. We have used the slanting guide pillar side pulls out method , after the analysis which is both economy and effective, and it can solve this question perfectly .
 Through reading this article, the reader may be provided very good references when carrying on other injection mold.
Key words: Mold ;Inclined push rod ;Core-pulling structure ;Core  models

论文目录,请与本站客服联系查看。


锁拉线扣手注塑模设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:起重机械部件线切割机加工程序设计 下一篇:松江180拖拉机后桥壳精镗组合机床..
推荐论文 本专业最新论文

点击查看关于 拉线 注塑模 设计 的相关论文题目 2010-05-12 11:22:44【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有