机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 90万吨缠绕式矿井提升机设计

90万吨缠绕式矿井提升机设计

本文ID:LW7104 字数:15420,页数:48

下载地址 全文下载链接(充值:168元) 如何充值?

90万吨缠绕式矿井提升机设计

论文编号:JX523   论文字数:15420,页数:48  有CAD图,开题报告,任务书,

90万吨缠绕式矿井提升机设计.png90万吨缠绕式矿井提升机设计天伦.png

摘  要
 
 矿井提升机不仅承担将矿物从几百米的地下运输至地面的功能,而且还输送人员和设备,是整个矿井中的咽喉设备。
 随着科学技术的发展及生产的机械化和集中化,目前,世界上经济比较发达的一些国家,提升机的运行速度已经达到20-25m/s,一次提升量达到50t,电动机容量已超过一万千瓦,其安全的可靠性尤为突出,如果设备提升出了故障,必然会造成停产。轻者影响煤炭质量,重者则会危及人身安全。因此,我们对提升机的机械设计提出了更高的要求。提高大型卷扬机的生产效率改进其计算指标,增加其强度、可靠性和使用寿命,这些都是与采用新的设计计算方法分不开的。
 在本次设计过程中,各部分的选型主要从矿井安全的角度来考虑,同时也保证了生产产量和效率。
 本设计主要是侧重于竖井单绳缠绕式箕斗提升系统,主要包括如下内容:
 (1)提升容器选择设计;
 (2)提升钢丝绳选择设计;
 (3)提升机选择设计;
 (4)提升机相对位置计算;
 (5)提升机运动学及动力学计算;
 (6)电动机容量计算等。
关键词:矿井提升机   大型卷扬机   电动机   机械设计  缠绕式箕斗提升

Abstract

 The shaft hoister occupies  important position, not only it bearing pharynx and laryns equipment in secondary several hundreds meters underground , moreover the shaft transporting the personnel and equipment .
 With the development of science and technology , some developed countries  in the world has developed more shaft hoister at present, The hoister operation speed already reaches 20-25 meters per second , one lifting amounts reaches 50 ton , and the electric motor capacities have already reaches 10,000 kilowatts, so the safe reliability is especially important ,It may be effects the production if the equipment has something unusual ,Therefore, we have brought forward a higher request to hoister machinery design. The efficacy raising, the large-scale hoist engine, increases its intensity , reliability and life time, These are all have contact with  new design.
 In the process of designing , we mainly thought from the mine safety in every part selections,and we also to ensure the output and efficiency at the same time.
The designing mainly put particular emphasis on silo hoisting system , includes:
(1)to choose the lifting hold;
 (2)to choose the hoist  steel wire rope;
 (3)to choose the hoister;
 (4)to scheme the relatives of the hoister;
 (5)to scheme the dynamics of the hoister;
 (6)to scheme the electromotor.
Keywords: shaft hoister   windlass   electromotor   mechanism-design
           silo hoisting system
目  录

摘 要………………………………………………………………………………………Ⅰ
Abstract……………………………………………………………………………………Ⅱ
目录…………………………………………………………………………………………Ⅲ
第 1章 绪论………………………………………………………………………………1
 1.1概述…………………………………………………………………………………1
 1.2矿山提升设备的组成………………………………………………………………2
 1.3本设计的任务………………………………………………………………………3
第2章 提升容器…………………………………………………………………………4
 2.1箕斗及其装载设备…………………………………………………………………4
 2.2箕斗的选择验算……………………………………………………………………6
第3章 提升钢丝绳………………………………………………………………………8
 3.1钢丝绳的结构和选用………………………………………………………………8
 3.2钢丝绳的选择计算…………………………………………………………………10
第4章 缠绕式提升机…………………………………………………………………13
 4.1单绳缠绕式提升机…………………………………………………………………13
 4.2提升机和天轮的选择计算…………………………………………………………14
第5章 提升机与井筒相对位置……………………………………………………18
 5.1提升机安装地点的选择原则………………………………………………………18
 5.2影响提升机与井筒相对位置的因素及其计算……………………………………18
第6章 矿井提升系统的运动规律…………………………………………………22
 6.1提升系统的速度图…………………………………………………………………22
 6.2提升系统的动力方程式……………………………………………………………22
第7章 电动机容量以及提升设备……………………………………………………33
 7.1电动机容量计算……………………………………………………………………33
 7.2电动机的电耗和效率………………………………………………………………36
第8章 主要承载力部件的强度计算…………………………………………………40
 8.1筒壳的计算载荷及其变形方程……………………………………………………40
 8.2主轴的强度验算……………………………………………………………………43
结论…………………………………………………………………………………………45
参考文献……………………………………………………………………………………46
致谢…………………………………………………………………………………………47
附件一、附件二……………………………………………………………………………48


90万吨缠绕式矿井提升机设计......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:工程挖掘机执行机构设计 下一篇:120万吨矿山摩擦式提升机设计
推荐论文 本专业最新论文

点击查看关于 90万吨 缠绕 矿井 提升机 设计 的相关论文题目 2010-05-16 11:26:45【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有