机械设计论文网


  • 首页|
  • 机械模具设计论文|
  • 机械模具开题报告|
  • 机械模具免费论文|
  • 机械模具外文翻译|
  • 数控论文|
  • 机械原创论文|
  • 焊工钳工论文|
  • 理工科论文|
         模具专业毕业设计   机械专业毕业设计   数控专业毕业设计

论文降重

当前位置:机械设计论文网 -> 机械模具毕业设计论文 -> 普通机床改造成键槽铣床

普通机床改造成键槽铣床

本文ID:LW85776 论文字数:11183

下载地址 全文下载链接(充值:128元) 如何充值?

普通机床改造成键槽铣床
论文编号:JX2373  论文字数:11183,附CAD图纸,任务书
普通机床改造成键槽铣床
普通机床改造成键槽铣床
摘要
本文作者研究了普通机床改造成键槽铣床时铣头立柱部件的改进方案。利用废旧机床的床身、床架、床鞍等基架部件进行改造设计,不仅节约了机床维护费用,同时提高了机床的回收利用率,是企业废旧机床未来利用的发展趋势。新的铣床立柱部件采用了电机、减速机、带轮的传动系统,使的铣刀的转速保持在一定的范围之内,减少了刀具振动引起的工件精度偏差。加入了升降螺杆装置和转轮,使得刀具在纵向的进给量可进行手工调节,提高了加工精度。皮带轮处采用简易张紧装置,可及时的对带轮的松脱,打滑现象进行调整,保证了传动的连续性。经过各种方案的比较,得出上述设计确是切实可行的,提高了机床的回收率,增加了机床的加工范围。
关键词:铣床      铣头立柱部件      升降螺杆
目  录
0.引言 ……………………………………………………………………1                                        
1.总体方案论证 …………………………………………………………………3
§1.1机床的初步设计 …………………………………………………3
§1.2机床工艺方案的拟定 ……………………………………………3 
§1.3机床运动方案的拟定 ……………………………………………3
§1.4机床技术参数的确定 ……………………………………………4
§1.5机床总体布局的确定 ……………………………………………4
§1.6机床原理图的拟定 ………………………………………………5
§1.7机床总体尺寸联系图的绘制 ………………………………………5
§1.8其他 ………………………………………………………………5
2.计算部分 ………………………………………………………………6                        
§2.1铣刀铣削功率的确定 ……………………………………………6
§2.2电机的选择 ………………………………………………………7
§2.3减速机的选择 ……………………………………………………7
§2.4V带的选择 …………………………………………………………12
§2.5主轴刚度强度校核 ………………………………………………15
3.设计部分 ………………………………………………………………15
§3.1蜗轮传动部分 ……………………………………………………15
§3.2带传动部分 ………………………………………………………16
§3.3铣刀的选用 ………………………………………………………17
§3.4轴的选择 …………………………………………………………17
§3.5箱体的设计………………………………………………………19
4.结论 ……………………………………………………………………21
工作小结 …………………………………………………………………22               
致谢 ………………………………………………………………………23
参考文献 …………………………………………………………………24             
附件清单 ……………………………………………………… 25
Summary
Author of this text study ordinary lathe transform keyway mill head post improvement scheme of part on the milling machine. Utilize old and useless lathe bed, bedstead of lathe, bed saddle, etc. base shelf part carry on transformation design, Economize lathe maintain the expenses, improve the recovery utilization ratio of the lathe at the same time not merely, It is the development trend that enterprises utilize in old and useless lathe future. The new post part of milling machine has adopted electrical machinery, moderating machine, transmission with wheel, Rotational speed of milling cutter that make keep and within certain range, reduce cutter work piece precision deviation that vibration cause. Put into hoist or lower spiral shell pole device and runner , make cutter entering giving amount can be regulated by hand vertical, Have improved the machining accuracy . Belt pulley office adopt simple and easy pieces of urgent device, can to lead wheel loose to take off, Skid phenomenon adjust, guarantee the continuity of the transmission. Through various kinds of comparison of scheme, draw and design not really feasible while being above- mentioned, Have improved the rate of recovery of the lathe , has increased the processing range of the lathe . 
    
Keyword: The milling machine     mills the post part of head    Hoist or lower spiral shell's pole


普通机床改造成键槽铣床......
论文人工降重
本论文在机械模具毕业设计论文栏目,由机械设计论文网整理,转载请注明来源 www.jixielw.top 更多论文,请点机械设计论文网查看
上一篇:气动扳手设计 下一篇:气动机械手回转臂结构设计
推荐论文 本专业最新论文

点击查看关于 普通 机床 造成 铣床 的相关论文题目 2015-09-05 22:10:57【返回顶部】
联系方式

相关栏目

数控专业论文
机械设计原创毕业论文
机械模具毕业设计论文
焊工钳工技师论文
机械模具开题报告
理工科论文下载
机械模具免费论文
机械模具外文翻译
联系方式

热门论文

联系方式


机械设计论文网提供机械设计论文范文,行政管理毕业论文,网站永久域名www.jixielw.top 

本站部分文章来自网友投稿上传,如发现侵犯了您的版权,请联系指出,本站及时确认并删除  E-mail: 17304545@qq.com

Copyright@ 2009-2021 机械设计论文网 版权所有